Nokia 002J3X4 User Manual page 28

An alarm is active.
You have activated the Silent profile, and the
device does not ring for an incoming call or
message.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When
the indicator is blinking, your device is trying
to connect with another device.
A GPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
A UMTS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
© 200 9 Nokia. All rights reserved.
, the connection is active. If the icon is , the
connection is on hold.
You have set the device to scan for wireless
LANs (WLAN), and a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that
has encryption.
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
27