Edit Sip Profiles - Nokia E52 User Manual

Wireless LAN plugins
Select Menu Ctrl. panel
>
Connection > Destinations, and an access point
group.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
New access point and define an access point that
uses WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2
3. Select WLAN security settings
EAP EAP plug-in settings.
>
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select
To edit the EAP plug-in settings, select
Edit.
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
in before other plug-ins when connecting to the
Settings and
>
Options
as the security mode.
WPA/WPA2
>
Options > Disable.
Options
>
to attempt to use the plug-
network with the access point, or
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu Ctrl. panel
>
Connection SIP
>
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
>
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
>
To create a SIP profile, select
profile Use default profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.

Edit SIP profiles

Select Menu Ctrl. panel
>
Connection SIP
>
Select Options Edit
>
Profile name — Enter a name for the SIP profile.
•
Options
>
Settings and
>
settings.
Options New SIP
>
or Use existing
Options Default
>
Settings and
>
settings.
and from the following:
Lower
145