Nokia Switch; Transfer Content; Synchronise, Retrieve, Or Send Content - Nokia 002J3X4 User Manual

Nokia Switch

Transfer content

You can use the Switch application to copy content such
as phone numbers, addresses, calendar items, and
images from your previous Nokia device to your device.
The type of content that can be transferred depends on
the model of the device from which you want to
transfer content. If that device supports
synchronisation, you can also synchronise data
between the devices. Your device notifies you if the
other device is not compatible.
If the other device cannot be switched on without a SIM
card, you can insert your SIM card in it. When your
device is switched on without a SIM card, the Offline
profile is automatically activated, and transfer can be
done.
Transfer content for the first time
1. To retrieve data from the other device for the first
time, on your device, select
Welcome application, or select
panel > Switch.
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
3. If you select Bluetooth connectivity as the
connection type, connect the two devices. To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device
© 200 9 Nokia. All rights reserved.
Phone switch in the
Menu Control
>
from which you want to transfer content. You are
asked to enter a code on your device. Enter a code
(1-16 digits), and select OK. Enter the same code on
the other device, and select OK. The devices are now
paired.
Some earlier Nokia devices may not have the Switch
application. In this case, the Switch application is
sent to the other device as a message. To install the
Switch application on the other device, open the
message, and follow the instructions on the
display.
4. On your device, select the content you want to
transfer from the other device.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device.
The transfer time depends on the amount of data to be
transferred.
Synchronise, retrieve, or
send content
Select Menu Control panel
>
After the first transfer, select from the following to start
a new transfer, depending on the model:
to synchronise content between your device and
the other device, if the other device supports
synchronisation. The synchronisation is two-way. If an
> Switch.
21