Advanced Wlan Settings; Wlan Security Settings; Wep Security Settings - Nokia 002J3X4 User Manual

To set the device to test the internet capability of the
selected WLAN automatically, to ask for permission
every time, or to never perform the connectivity test,
select Internet connectivity test
automatically, Ask every
select Run automatically
performed when the device asks for it, and the
connectivity test is performed successfully, the access
point is saved to internet destinations.
To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the home screen. The MAC address is
displayed.

Advanced WLAN settings

Select Options
>
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select
configuration > Disabled, and define the following:
Long retry limit
•
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
Short retry limit
•
transmission attempts if the device does not receive
a clear-to-send signal from the network.
RTS threshold
•
which the WLAN access point device issues a request
to send before sending the packet.
158
Run
>
time, or Never run. If you
or allow the test to be
Advanced settings. The advanced
Automatic
— Enter the maximum number of
— Enter the maximum number of
— Select the data packet size at
TX power level — Select the power level of your
•
device when sending data.
Radio measurements
•
radio measurements.
Power saving — Select whether to use the WLAN
•
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options Restore defaults.
>

WLAN security settings

Select Menu Control panel
>
Connection Destinations
>
follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one
of the access point groups, and select an access point
marked with .
To enter the settings for the selected security mode,
select WLAN security settings.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When the WEP security mode is in
— Enable or disable the
Settings and
>
Access point, and
>
© 200 9 Nokia. All rights reserved.