this plug-in for network authentication after attempting
to use other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol
(SIP) settings
Select
Menu
Ctrl. panel
>
SIP
settings.
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings for
these sessions. The SIP profile used by default for a
communication session is underlined.
To create a SIP profile, select
profile
Use default profile
>
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Edit SIP profiles
Select
Menu
Ctrl. panel
>
SIP
settings.
Select
Options
>
Profile name
•
Service profile
•
Default destination
132
•
for the internet connection.
Settings
and
>
Options
New SIP
>
or
Use existing
Options
>
Settings
and
>
Edit
and from the following:
— Enter a name for the SIP profile.
— Select
IETF
or
Nokia
— Select the destination to use
Default access point
•
for the internet connection.
Public user name
•
by your service provider.
Use compression
•
Registration
•
Use security
•
Proxy server
•
SIP profile.
Connection
>
Registrar server
•
settings for this SIP profile.
Edit SIP proxy servers
Select
Options
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional security
profile.
and speed up access to the service.
Select from the following:
Default
Proxy server address
•
address of the proxy server in use.
Realm
•
User name
•
password for the proxy server.
Connection
>
Allow loose routing
•
allowed.
Transport type
•
Port
•
3GPP.
— Select the access point to use
— Enter your user name provided
— Select if compression is used.
— Select the registration mode.
— Select if security negotiation is used.
— Enter the proxy server settings for this
— Enter the registration server
New SIP profile
>
— Enter the host name or IP
— Enter the proxy server realm.
and
Password
— Enter your user name and
— Select if loose routing is
— Select UDP,
— Enter the port number of the proxy server.
or
Edit
Proxy
>
Automatic
or TCP.