Important Warnings and Safety Instructions Avoid exposing the device to shocks, high pressure or temperatures above 450C. Avoid placing the device near fans, ventilation or other noise sources. This will degrade audio performance. Avoid scratching or leaving fingerprints on the lens cover, this degrades image quality. If possible, keep the protective plastic on the lens cover during installation. Do not clean the camera with harsh detergents, gasoline or chemicals such as acetone.
Camera placement High on a wall or in the ceiling are good placements for the camera. 300 mm Avoid placing the camera near obstacles and overhangs, or in a corner. This causes reflections which reduce the image quality, especially when using night vision.
Page 5
Using the drilling template to place the camera For through the wall cable connections, mark the cable entry position using the template.
Page 6
Drill the holes and install the anchors and camera Dia: 6mm, [¼”] Depth: 40mm [1.5”]...
Attach the ethernet cable Make sure the light sensor is not covered by the casing. Adjust the picture Use the video stream to confirm the image orientation. Adjust the image orientation in Alta Video.
Need help?
Do you have a question about the Avigilon Ava Compact Dome and is the answer not in the manual?
Questions and answers