Grandstream HT802 V2 Manual

PACKAGE CONTENT

HT802 V2 PORTS and LED indicators

1. Power ON LED
2. FXS 1-2 LED
3. NET LED
4. NET port
5. Reset
6. Micro-USB power socket (5V)
7. FXS ports

The HT802 V2 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit ("Emergency Service(s)") or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIP-compliant Internet telephone service, properly configure the HT802 V2 to use that service, and periodically test your configuration to confirm that it works as you expect. It is also your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE HT802 V2. NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE HT802 V2 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.

PRECAUTIONS

• Please DO NOT power cycle the HT802 V2 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.
• Use only the power adapter included in the HT802 V2 package. Using an alternative non-qualified power adapter may possibly damage the unit.

USA
Tel: +1 (617) 566 - 9300
www.grandstream.com

Documents / Resources

References

• Grandstream Networks - Networking & Unified Communications

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Grandstream HT802 V2 Manual