Using Isoflex - Britax PARKWAY SGL User Manual

Using the Child Seat
Using ISOFLEX™ Flexible Lower LATCH Connection
System
The ISOFLEX™ System helps to anchor the booster seat into
the car for added stability and safety in the event of a crash.
LOWER UNIVERSAL ANCHORAGE SYSTEM LOCATIONS
Lower
The figure above shows typical locations for lower anchors in
a vehicle. Check your vehicle owner's manual to learn if it is
equipped with lower anchors.
Standard vehicle seat spacing between lower anchors is 11
inches (27.9 cm). This child seat can be used in a seating
position with up to 20 inches (50.8 cm) of space between the
lower anchors if the vehicle manufacturer allows.
18
Lower Anchors
Using the Lower Connectors
Where to find the Lower Connectors
The lower connectors are located in the back of the base of
the booster seat. Store the connectors in the slots when not in
use.
To remove the lower connector from the storage slot or
lower anchor:
Press and hold the red release
1
button.
Pull the lower connector
2
from the storage slot or lower
anchor.
To attach the lower connector to
the storage slot or lower anchor:
Firmly push the lower connector
into the slot or lower anchor until a
click is heard.
Using the Child Seat
Top
19