Using Isoflex Flexible Lower Latch Connection System; Using The Lower Connectors - Britax parkway SGL User Manual

Using the Booster Seat
Using ISOFLEX Flexible Lower Connection System
The ISOFLEX System helps to anchor the booster seat into
the car for added stability and safety in the event of a crash.
LOWER ANCHORAGE SYSTEM LOCATIONS
Lower
Up to 20 in. (50.8 cm)
The figure above shows typical locations for lower anchors in
a vehicle. Check your vehicle owner's manual to learn if it is
equipped with lower anchors.
Standard vehicle seat spacing between lower anchors is
11 inches (27.9 cm). This child seat can be used in a seating
position with up to 20 inches (50.8 cm) of space between the
lower anchors if the vehicle manufacturer allows.
18
Lower Anchors

Using the Lower Connectors

Where to find the Lower Connectors
The lower connectors are located in the back of the base.
Store the connectors in the slots when not in use.
To remove the lower connector from the storage slot or
lower vehicle anchor:
Press and hold the red release
1
button.
Pull the lower connector
2
from the storage slot or lower
anchor.
To attach the lower connector to
the storage slot or lower vehicle
anchor:
Firmly push the lower connector
into the slot or lower vehicle
anchor until a click is heard.
Using the Booster Seat
Top
19