Using The Child Seat; Attaching The Backrest; Removing The Backrest; Attaching/Removing Backrest - Britax PARKWAY SGL User Manual

Using the Child Seat

Before you use this booster seat for the first time, you will
have to complete the assembly steps below.

Attaching the Backrest

IMPORTANT: Keep fingers away from moving
parts to avoid potential injury.
1 Detach the elastic loops from the elastic
retainers on the base cover from the back
of the booster seat base (Fig. A).
2 Place the base on a flat surface. From the
child's left side of the booster seat, align
the backrest hinge cylinder with the hinge
slot on the base.
3 Push the backrest hinge all the way into
the base hinge slot (Fig. B).
IMPORTANT: DO NOT rotate the backrest
until the cylinder has been completely inserted
into the base hinge slot. Rotating the backrest
before it has been completely inserted may
result in damage to the booster seat.
4 Rotate the backrest up until it doesn't rotate
into the flat position under its own weight
(Fig. C).
5 Attach the elastic loops of the base cover
to the elastic retainers on the back of the
booster seat (Fig. D).
14

Removing the Backrest

1 Place the booster seat on a flat surface.
2 Detach the seat cover from the base by
unhooking the elastic loops from the
elastic retainers on the back of the base
(Fig. E).
a
3 Push the backrest down until it lies flat
and align the backrest hinge cylinder with
the hinge slot on the base (Fig. F).
4 Slide the backrest from the child's left
side of the base (Fig. G).
5 Attach the elastic loops of the base cover
b
to the elastic retainers on the back of the
base (Fig. H).
NOTE: Store the backrest in a safe place.
c
d
Using the Child Seat
e
f
g
h
15