Care And Maintenance - Britax PARKWAY SGL User Manual

Care and Maintenance

Cover Removal
Removing the Backrest
Cover
1 Detach the elastic loops (6 total)
from the backrest (Fig. A).
2 Remove the backrest cover.
NOTE: Be careful not to damage the
EPS foam.
Removing the Head
Restraint Cover
1 Detach the elastic loops (6 total)
from the backrest (Fig. B).
2 Remove the head restraint cover.
Removing the Seat Cover
1 Detach the elastic loops (4 total) from
the booster seat base (Fig. C).
2 Slide the plastic retainer flaps (3
total) from the front and sides of the
booster seat base (Fig. D).
3 Remove the booster seat cover.
32
a
b
Cleaning the Cover
• HAND WASH, using cold water and
mild soap.
• LINE DRY, to prevent cover from
shrinking.
• DO NOT:
c
machine dry.
Replacing the Cover
To replace the cover, reverse the steps
of each section.
Cleaning the Shell
• SPONGE CLEAN, using warm water
and mild soap.
d
• TOWEL DRY
• DO NOT:
cleaners, or disassemble the
booster seat in any way, except as
instructed.
Care and Maintenance
Bleach, machine wash, or
Use solvents, abrasive
33