Page 1
PINNACLE™ 90 User Guide Guía del usuario IMPORTANT: Thoroughly read and follow all instructions before installing this child seat. Store this user guide in the pocket behind the cover (See features pages for reference). IMPORTANTE: Debe leer y seguir atentamente todas las instrucciones antes de instalar el asiento de seguridad para niños.
Child Seat Features Child Seat Features Cover 19 Versa-Tether Adjuster Side Impact Cushion 20 Versa-Tether Hook Arm Rest 21 Versa-Tether Webbing Booster Mode Belt Guide 22 Versa-Tether Storage Strap Cup Holder and Storage 23 Harness Straps Harness and Head Restraint Height Adjuster 24 Harness Mode Belt Path - Green (CLICKTIGHT) Head Restraint 25 Serial Number and Manufactured Date Label...
• The top tether MUST be used in harness mode for children that seat belts are used. weigh more than 65 lbs (29.5 kg). Britax recommends that the top tether be used at all times when installing the child seat. Using the •...
WARNING! Booster mode use of this child seat is ONLY for child seat’s model number and manufacturing date to Britax Child Safety, children who meet ALL of the following requirements. Use only the vehicle’s lap and shoulder belt to secure the child. If the child does not Inc., P .O.
See below. • The top tether MUST be used in harness mode for children that weigh more than 65 lbs (29.5 kg). Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury.
Page 7
• Check that your vehicle has a top tether anchor. The top tether MUST be used in harness mode for children that weigh more than 65 lbs (29.5 kg). Britax recommends that the top tether be used at all times when installing the child seat.
Page 8
* The top tether MUST be used in harness mode for slack. children that weigh more than 65 lbs (29.5 kg). Britax recommends that the top tether be used at all times IMPORTANT: Only remove slack when installing the child seat.
Page 9
Lock and remove slack from * The top tether MUST be used in harness mode for the vehicle belt. children that weigh more than 65 lbs (29.5 kg). Britax recommends that the top tether be used at all times IMPORTANT: Only remove when installing the child seat.
Positioning the Child Seat: Booster Mode Positioning the Child Seat: Booster Mode LATCH with CLICKTIGHT Firmly press the Versa-Tether hook over a designated vehicle tether anchor. Remove Before you begin: slack. Secure excess webbing with IMPORTANT: It is not necessary to use LATCH to position the elastic strap.
Securing Your Child Securing Your Child Place the child in the child Harness Mode seat and position the harness straps around the child. WARNING! Fasten the harness buckle. • Never route the vehicle belt over the child when using this * Proper connection is confirmed child seat in harness mode.
Securing Your Child Securing Your Child Remove slack from the vehicle Booster Mode belt. * The shoulder part must lie across the center of the child’s WARNING! chest, at or above the child’s • Only use a lap-shoulder belt to secure the child in booster shoulder.
Child Seat Functions Child Seat Functions Harness and Head Restraint Height Adjustment Adjusting Buckle Position Removing the Buckle IMPORTANT: Make all adjustments for the fit of your child before Unbuckle the harness by using the child seat. Place the child seat on the floor and have your child sit in the seat.
Page 14
Child Seat Functions Child Seat Functions Upright Position Fastening the Buckle Releasing the Buckle Insert one tongue at a time into Press the release button and the buckle. pull the tongues from the Recline Position buckle. NOTE: Proper connection is confirmed with an audible click NOTE: Periodically clean after inserting each buckle...
Page 15
• The top tether MUST be used in harness mode for children that weigh more than 65 lbs (29.5 kg). Britax recommends To remove the lower connector from the storage slot or lower...
Child Seat Functions Switching Between Modes Energy-Absorbing Versa Tether The Versa-Tether can indicate when the child seat has been in a Before you begin: moderate or severe crash and replacement of the child seat is IMPORTANT: It is not necessary to remove the harness to use this necessary.
Switching Between Modes Switching Between Modes Place the seat cover and foam Booster to Harness Mode: Restoring the Harness and Buckle back in their original position and attach the retaining clips. Open the CLICKTIGHT. * Locate the two slots in the CLICKTIGHT cover.
Switching Between Modes Switching Between Modes Fasten the chest clip. Open the CLICKTIGHT. * Push together until a click is * Locate the two slots in the heard. CLICKTIGHT cover. * Squeeze the CLICKTIGHT release levers. Fasten the harness buckle. Unhook the harness straps from the CLICKTIGHT hip anchors.
Switching Between Modes Switching Between Modes Nest the harness straps by Booster to Harness Mode: Replacing the Harness and Buckle inserting the right strap loop Open the CLICKTIGHT. into the left strap loop. * Locate the two slots in the CLICKTIGHT cover.
Switchable Retractor with Sewn Latch Plate and Inflatable Seat Belt NOTE: This BRITAX car seat may not be compatible with every inflatable lap-shoulder belt. See FAQS in the support section of the BRITAX website (www.britaxusa.com/support) for additonal instruc- tions.
Vehicle Compatibility Vehicle Compatibility Lap Belt Vehicle Buckle Positions Locking Latch Plate The position of the vehicle WARNING! Has a latch plate that belt buckle can adversely affect the stability does not allow the belt to of the child seat. become loose after it is buckled.
Care and Maintenance Care and Maintenance Unhook the elastic bands, Cover Removal then remove the side wing covers from each side of the WARNING! child seat shell. • Never remove the buckle tongues from the harness. * Be careful not to damage the •...
Page 23
Care and Maintenance Care and Maintenance Fit the cover over the Cleaning the Cover CLICKTIGHT and pull the • HAND WASH the cover using cold water and mild soap. elastic band over the hook on • LINE DRY to prevent the cover from shrinking. the bottom of the CLICKTIGHT.
Page 24
Care and Maintenance Care and Maintenance To Clean: Cleaning the Buckle • THOROUGHLY RINSE the buckle using warm water. • TEST THE BUCKLE by fastening and unfastening until a positive If your child eats and drinks while in the child seat, you may need click is heard after inserting each buckle tongue.
CLICKTIGHT again. The warranty and remedies as set forth above are exclusive and in lieu of all others, oral or written, express or implied. In no event will BRITAX, or the retailer selling this Problem: The harness is hard to adjust.
Características del asiento de seguridad para niños Características del asiento de seguridad para niños SISTEMA DE INSTALACIÓN PARA UN AJUSTE RÁPIDO Y SEGURO Cubierta 19 Dispositivo de ajuste del Versa-Tether Cojines protección de impacto lateral 20 Gancho del Versa-Tether Apoyabrazos 21 Versa-Tether (correa de anclaje superior) Guía del cinturón para modo regulable 22 Correa sobre del Versa-Tether...
11,3 y 40,8 kg (25 y 90 lb), miden entre 76,2 y 147,3 cm (30 y o dispositivos de ajuste que no sean de Britax. Su uso podría hacer 58 pulg.), y tienen como mínimo 2 años de edad.
• La correa de retención superior DEBE utilizarse en modo de regulable. Observe el siguiente diagrama. arnés para niños que pesan más de 29,5 kg (65 lb). Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños.
La correa de retención superior DEBE utilizarse en modo de Tense primero la banda arnés para niños que pesan más de 29,5 kg (65 lb). Britax horizontal del cinturón de recomienda que se use la correa de retención superior en seguridad del vehículo (a) y...
Page 32
Jale del extremo de la tira La correa de retención superior DEBE utilizarse en modo de del conector inferior para arnés para niños que pesan más de 29,5 kg (65 lb). Britax tensarlo. recomienda que se use la correa de retención superior en todo momento, cuando se esté...
Page 33
La correa de retención superior DEBE utilizarse en modo de IMPORTANTE: Sólo eliminar la arnés para niños que pesan más de 29,5 kg (65 lb). Britax holgura del cinturón de seguridad recomienda que se use la correa de retención superior en del vehiculo.
Posición del asiento de seguridad para niños: Modo regulable Posición del asiento de seguridad para niños: Modo regulable Cierre el CLICKTIGHT. LATCH con CLICKTIGHT * Oirá un clic cuando el CLICKTIGHT esté perfectamente acoplado. Antes de comenzar: IMPORTANTE: No es necesario utilice el sistema LATCH en modo regulable.
Sujeción del niño Sujeción del niño Sujeción del niño Siente a su hijo en el asiento Modo de arnés de seguridad para niños y ajuste las correas del arnés ADVERTENCIA! alrededor del niño. • Nunca se debe pasar el cinturón del vehículo por encima del niño cuando se utilice este asiento de seguridad para Abroche la hebilla del arnes niños en modo de arnés.
Sujeción del niño Sujeción del niño Modo regulable Tense el cinturón de seguridad del vehículo. ADVERTENCIA! * La banda transversal del • Solo debe usarse el cinturón de banda horizontal y cinturón del vehículo debe transversal cuando se esté sujetando al niño utilizando el estar colocado por en medio del modo regulable.
Funciones del asiento de seguridad para niños Funciones del asiento de seguridad para niños Regulación de altura de reposacabezas y del Ajuste de la posición de arnés la hebilla Extracción de la hebilla IMPORTANTE: Antes de utilizar el asiento de seguridad para niños, debe realizar todos los ajustes oportunos para adaptarlo al Desabroche el arnés tamaño de su hijo.
Page 38
Funciones del asiento de seguridad para niños Funciones del asiento de seguridad para niños Posición vertical Cómo abrochar la Cómo desabrochar la hebilla hebilla Inserte las lengüetas en la Presione el botón de Posición reclinada hebilla de una en una. desbloqueo y quite las dos lengüetas de la hebilla.
Page 39
Para extraer el conector inferior del compartimento o anclaje • La correa de retención superior DEBE utilizarse en modo de inferior: arnés para niños que pesan más de 29,5 kg (65 lb). Britax recomienda que se use la correa de retención superior en Mantenga pulsado el botón todo momento, cuando se esté...
Funciones del asiento de seguridad para niños Cómo cambiar de modo Absorción de fuerzas Versa Tether El Versa-Tether puede indicar cuando el asiento de seguridad para Antes de comenzar: niños ha estado implicado en un accidente moderado o grave, y •...
Cómo cambiar de modo Cómo cambiar de modo Coloque la almohadilla Cómo pasar del modo regulable al modo de arnés: abdominal para el sistema de Restauración del arnés y la hebilla abrochado hacia delante y póngala encima de la palanca Abra el CLICKTIGHT.
Page 42
Cómo cambiar de modo Cómo cambiar de modo Ajuste el broche pectoral. Abra el CLICKTIGHT. * Acople las piezas hasta que se * Localice las dos ranuras en la oiga un clic. cubierta del CLICKTIGHT. * Presione las palancas de desbloqueo del CLICKTIGHT para abrirlo.
Cómo cambiar de modo Cómo cambiar de modo Como pasar de modo regulable al modo de arnés: Junte las correas del arnés insertando la lazada de la Sustitición del arnés y la hebilla correa derecha en la izquierda. Abra el CLICKTIGHT. * Localice las dos ranuras en la cubierta del CLICKTIGHT.
5. Sistema retráctil intercambiable con hebilla cosida al tejido con cinturones inflables NOTA: Este asiento de seguridad de niño BRITAX puede o no pu- ede ser compatible con cada cinturon inflable. Consulta las FAQs (preguntas más frequentes) en la seccion de suporte del sitio de web de BRITAX (www.britaxusa.com/support) por más informacion.
Compatibilidad con el vehículo Compatibilidad con el vehículo Banda horizontal Posición de la hebilla del vehículo 6. Hebilla de cierre La posición de la ADVERTENCIA! Dispone de una hebilla que hebilla del cinturón del vehículo puede impide que el cinturón se perjudicar la estabilidad del asiento de suelte una vez abrochado.
Cuidado y mantenimiento Cuidado y mantenimiento Desenganche las cintas Extracción de la cubierta elásticas y retire las cubiertas laterales de ambos laterales ADVERTENCIA! del exterior del asiento de • Nunca quite las lengüetas de la hebilla para desabrochar seguridad para niños. el arnés.
Page 47
Cuidado y mantenimiento Cuidado y mantenimiento Coloque la cubierta sobre el Limpieza de la cubierta CLICKTIGHT y pase la cinta • LAVAR A MANO con agua fría y jabón suave. elástica por el enganche • COLGAR PARA SECAR a fin de evitar que encoja. que se encuentra en la parte •...
Page 48
Cuidado y mantenimiento Cuidado y mantenimiento Limpieza: Limpieza de la hebilla • ENJUAGAR BIEN con agua templada. • PROBAR LA HEBILLA abrochándola y desabrochándola hasta Si el niño come y bebe en el asiento, usted deberá revisar la que oiga claramente un clic después de insertar cada lengüeta. hebilla periódicamente y limpiar los restos que pueda haber de Si no oye ningún clic, debe proceder a limpiar la hebilla de comida o líquido solidificado.
BRITAX no aprueba el uso de cubiertas, piezas, juguetes, Posible solución: Puede haber suciedad u otros objectos que accesorios o dispositivos de ajuste que no sean de Britax Child Safety, Inc. Su uso interfieren con el mecanismo. Asegúrese de que el área del podría hacer que el asiento no cumpla con las normas federales de seguridad...
Page 51
Britax Child Safety, Inc. Tel. : 1-888-427-4829 4140 Pleasant Road 1-704-409-1699 Fort Mill, SC 29708 www.Britax.com A Britax Childcare Group Limited company...
Need help?
Do you have a question about the PINNACLE 90 and is the answer not in the manual?
Questions and answers