Harness Strap Adjustment - Britax CHAPERONE User Manual

Harness Strap Adjustment

A snug strap should not allow any slack. It lies in a relatively straight line
without sagging. It does not press on the child's flesh or push the child's
body into an unnatural position.
To Adjust the Shoulder Straps of the Harness:
1
Locate the harness yoke on the
back of the infant carrier shell.
3
Select the appropriate loop on
the harness strap for the size of
your infant.
* Use the inner loops for infants
11 lbs (5 kg) and under, and
the end loops for infants 11 lbs
(5 kg) and over.
* DO NOT use the middle
section between the end and
inner loops.
4
Slide the harness strap onto the
harness yoke.
When using the infant carrier for a child 11 lbs (5
kg) or below, the inner harness strap loops must be
used. For a child above 11 lbs (5 kg), the end loops
of the harness strap must be used. See page 50.
Depending on the size of your child, you will need to
adjust the shoulder straps on the harness to ensure
the harness provides the most snug fit around your
child. See page 50 for important information for
adjusting the buckle position for the fit of your child.
Securing Your Child
2
Slide the harness straps from
the harness yoke.
Inner
Loops
X
End
Loops
49
X