Harness Height Adjustment; Adjusting Buckle Position - Britax Advocate 70 CS User Manual

Child Seat Functions

Harness Height Adjustment

Loosen the harness.
1
a Lift harness adjuster lever
b Pull both harness straps forward
Squeeze the harness height
2
adjuster, slide the harness
into the desired position and
release.
* Ensure the harness has locked
into position.
NOTE: In rear-facing mode, always position the harness straps at or
below your child's shoulders. See page 6.
In forward-facing mode, always position the harness straps at or
above your child's shoulders. See page 7.
18
b
a

Adjusting Buckle Position

ImpoRtANt:
• ALWAYS position the buckle in the
inner slot for rear-facing use.
• The vehicle belt must pass in front of
the buckle strap for rear-facing use.
• NEVER leave the buckle in the
adjustment slot.
• Use the outer buckle slot when installing the child seat forward-
facing with a child weighing 30 lbs (13.6 kg) and above or if the
buckle is under the child in the inner
1 Unbuckle the harness. Remove
the belly pad and push the
buckle through the cover.
3 Slide the buckle retainer into
the buckle slot, and ensure the
red release button faces out.
Child Seat Functions
ADJUSTMENT
SLOT
position.
2 Turn the buckle webbing
and slide it between buckle
positions.
19