Britax CHAPERONE User Manual page 32

30 Installing the Base
10 Verify that all connections are secure. Check that:
9 The vehicle belt is not twisted.
9 The vehicle belt is tight and locked.
* Check that the vehicle belt retractor is locked or,
* Check that the vehicle belt has been properly routed through the lock-off
and that the lock-off is closed.
9 The infant carrier handle is rotated into any locked position.
9 The infant carrier is secure.
* If the base and infant carrier can be moved more than 1 in. (2.5 cm)
front-to-back or side-to-side at the vehicle belt path, repeat installation or
choose another seating location.
11 Check the recline angle.
NOTE: It may be necessary to install the base more than once to
achieve the proper recline angle.
12 The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.