Table of Contents
Advertisement
3
Route the lap part of the vehicle
belt through the second belt guide.
* Do not route the shoulder part
of the vehicle belt through the
belt guides.
5
Push the infant carrier firmly into
the vehicle seat while removing
all slack from the lap part, and
then the shoulder part of the
vehicle belt.
7
Thread the locking clip onto both
belts, placing it within 1 inch (2.5
cm) of the latch plate.
Installing Your Infant Carrier without Base
4
6
Verify that the vehicle belt is not
twisted and then buckle.
Hold the lap and shoulder belts
together behind the latch plate
and unbuckle.
41
Hide quick links:
Advertisement
Table of Contents
