Britax CHAPERONE User Manual page 45

12 The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
NOTE: It may be necessary to install the infant carrier more than once to
achieve the proper recline angle.
Follow the steps below if adjustment of the recline angle is
necessary:
a
Unbuckle the seat belt.
b
Place a rolled towel or pool
noodle(s) in the vehicle seat
bight.
* See note below.
Repeat the previous steps until a secure installation with proper
recline angle is achieved. Continue with installation instructions from
step 2 on page 40.
NOTE: Configure pool noodle(s) to accommodate variations in
vehicle seat contour as necessary.
Installing Your Infant Carrier without Base
c
Place the infant carrier on the
towel or pool noodle(s) to help
level the base.
43