Subscribe to Our Youtube Channel
Related Manuals for WLINK WL-ODU310
Summary of Contents for WLINK WL-ODU310
- Page 1 Quick Start Guide ---Apply to WL-ODU310 Outdoor 4G+/4G Router V1.5 http://www.wlink-tech.com Jan, 2025...
-
Page 2: Table Of Contents
WL-ODU310 Quick Start Contents .............................2 Hardware Installation ........................3 Packing Contents ........................3 Antenna Installation ......................... 3 SIM Installation ......................... 4 Power on Router ........................4 Mount Kits Installation ......................5 LED Status Indication ......................5 Configuration .............................6 Login ............................6 Overview ............................7 Traffic Stats. -
Page 3: Hardware Installation
WL-ODU310 Quick Start Mount Kits WL-ODU310 4G/Wi-Fi Antennas PoE Power Adapter... -
Page 4: Sim Installation
WL-ODU310 Quick Start Connect PoE(passive) port via RJ45 Cable between WL-ODU310 and Wlink power adapter. Connect LAN port of Power adapter to PC to configure the router. -
Page 5: Mount Kits Installation
WL-ODU310 Quick Start silk-screen Indicator Note Green Good Signal Color Poor Signal Quick Blinking (0.5s) Offline Slow Blinking (1.5s) 3G online Status Solid light 4G online... -
Page 6: Configuration
Configuration Login To access and configure certain features of the WL-ODU310, one needs to log in to the WL-ODU310. Connect one Ethernet cable to PoE interface of device and PoE adapter, and connect other Ethernet cable between LAN of PoE adapter and PC. -
Page 7: Overview
WL-ODU310 Quick Start User name: admin Password: admin Overview The overview GUI will be display router system information, Ethernet ports status, VPN connection status, LAN information, 4G connection information and WLAN information. Figure 2-2 Router Status GUI Traffic Stats. Click Status->Traffic Stats. to enter the traffic stats.GUI.to check Cellular/WAN traffic in... -
Page 8: Device List
WL-ODU310 Quick Start Figure 2-3 Traffic Stats. GUI Device List Click Status->Device List to enter the device list GUI.to check the connected devices information in the list. Figure 2-4 Device List GUI Tool Column Figure 2-5 Tool Column GUI Ping Click Tools->Ping to enter ping test GUI. - Page 9 WL-ODU310 Quick Start Trace Click Tools->Trace to enter trace test GUI. diagnostic tool for displaying the routeand measuring transit delays of packets across an Internet IP network. Click Tools-> Log to enter Log GUI. Use to check logs in GUI, download GUI and send logs to server.
- Page 10 WL-ODU310 Quick Start Bandwidth Click Bandwidth to enter bandwidth graphic GUI. Used to check cellular/LAN/Wi-Fi real-time bandwidth. System Click system to choose software reboot, hardware reboot and logout GUI.
-
Page 11: Basic Network
WL-ODU310 Quick Start Basic Network Cellular Setting Step 1 Basic Network-> Cellular, you can modify relevant parameter according to the application. Table 2-1 Cellular Setting Instruction Parameter Instruction Enable Modem Enable/Disable 4G mode. Use PPP ECM dialup as default. PPP optional. -
Page 12: Lan Setting
WL-ODU310 Quick Start Parameter Instruction Cellular Traffic Check The router will reconnect/reboot once there’s no Rx/Tx data. CIMI Send to Send CIMI to a defined IP and port by TCP protocol. SMS Code Remote control the router by SMS. Only the configured SMS code will work. -
Page 13: Dynamic Dns Setting
WL-ODU310 Quick Start Table 2-2 LAN Setting Instruction Parameter Instruction Bridge Supports 4 LAN IP address for br0 to br3 interface. If need to support VLAN, please go to VLAN GUI. Router IP Address Router IP address, default IP is 192.168.1.1 Subnet Mask Router subnet mask, default mask is 255.255.255.0... -
Page 14: Wlan Setting
Table 2-3 DDNS Setting Instruction parameter Instruction Default is standard DDNS protocol, for customized protocol, please IP address contact Wlink engineer. Usually, use default IP 0.0.0.0 Auto refresh Set the interval of the DDNS client obtains new IP, suggest 240s or time above Service Select the DDNS service provider that listed. - Page 15 WL-ODU310 Quick Start Table 2-4 Basic of WLAN Setting Instruction Parameter Instruction Enable wireless Enable or Disable the Wireless Wireless mode Support AP mode. Wireless Network Support Auto/b/g/n optional for 2.4G. protocol SSID The default is router, can be modified as per application.
-
Page 16: Wireless Survey
WL-ODU310 Quick Start Step 1 Please click “Save” to finish. ----End Wireless Survey Step 1 WLAN> Wireless Survey to check survey. Advanced Network Setting Port Forwarding Step 1 Advanced Network > Port Forwarding to enter the GUI, you may modify the router... -
Page 17: Dmz Setting
WL-ODU310 Quick Start Table 2-5 Port Forwarding Instruction Parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Src. Address Source IP address. Forward only if from this address. Ext. Ports External ports. The ports to be forwarded, as seen from the WAN. -
Page 18: Ip Passthrough Setting
WL-ODU310 Quick Start Step 2 Please click ”save” to finish ----End IP Passthrough Setting Step 1 Advanced Network> IP Passthrough to check or modify the relevant parameter. Table 2-7 IP Passthrough Instruction parameter Instruction Enable Enable IP Passthrough MAC Address Enable DHCP of device. -
Page 19: Captive Portal
WL-ODU310 Quick Start Table 2-8 Triggered Instruction parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Triggered Ports Trigger Ports are the initial LAN to WAN "trigger". Transferred Forwarded Ports are the WAN to LAN ports that are Ports opened if the "trigger"... - Page 20 Ex-storage: Captive portal file is in extended storage such as SD card. Web Host Configure domain name for the captive portal access. For example, Configure as wlink.tech.com, we might directly access to captive portal page in the website as wlink.tech.com Portal Host Reserved.
-
Page 21: Upnp/Nat-Pmp Setting
WL-ODU310 Quick Start UPnp/NAT-PMP Setting Step 1 Advanced Network> Upnp/NAT-PMP to check or modify the relevant parameter. Step 2 Please click ”save” to finish. ----End Bandwidth Control Setting Step 1 Advanced Network> Bandwidth Control to check or modify the relevant parameter. -
Page 22: Vrrp Setting
WL-ODU310 Quick Start DL Rate Mix Download rate DL ceil Max download rate UL Rate Mix Upload rate UL ceil Max upload rate Priority The priority of a specific user. Default Class If no specified IP/MAC, the download and upload limit for total speed for all of device. -
Page 23: Vpn Tunnel
WL-ODU310 Quick Start Step 2 Please click ”save” to finish. ----End VPN Tunnel GRE Setting Step 1 VPN Tunnel> GRE to check or modify the relevant parameter. Table 2-11 GRE Instruction Parameter Instruction GRE tunnel number Tunnel Address GRE Tunnel local IP address which is a virtual IP address. -
Page 24: Openvpn Client Setting
WL-ODU310 Quick Start Parameter Instruction Keep alive GRE tunnel keep alive to keep GRE tunnel connection. Interval Keep alive interval time. Retries Keep alive retry times. After retry times, GRE tunnel will be re-established. Description Step 2 Please click ”save” to finish. - Page 25 WL-ODU310 Quick Start Table 2-12 Basic of OpenVPN Instruction Parameter Instruction Start with WAN Enable the Openvpn feature for 4G/3G/WAN port. Interface Type Tap and Tun type are optional. Tap is for bridge mode and Tunnel is for routing mode.
- Page 26 WL-ODU310 Quick Start Parameter Instruction Authentication HMAC authorization As the configuration requested. Create NAT on Configure NAT in Openvpn tunnel. tunnel Table 2-13 Advanced of OpenVPN Instruction Parameter Instruction Poll Interval Openvpn client check router’s status as interval time. Redirect Internet Configure Openvpn as default routing.
- Page 27 WL-ODU310 Quick Start Table 2-14 Keys of OpenVPN Instruction Parameter Instruction Keep certificate as the same as server Certificate Authority Client Certificate Keep client certificate as the same as server Client Key Keep client key as the same as server...
- Page 28 WL-ODU310 Quick Start Table 2-16 PPTP/L2TP Basic Instruction parameter Instruction VPN enable Protocol VPN Mode for PPTP and L2TP Name VPN Tunnel name Server Address VPN Server IP address. User name As the configuration requested. Password As the configuration requested.
- Page 29 WL-ODU310 Quick Start Custom As the configuration requested. Options Table 2-18 PPTP Advanced Instruction PPTP Advanced enable Name PPTP Tunnel name Accept DNS As the configuration requested. MTU is 1450bytes as default MRU is 1450bytes as default MPPE As the configuration requested...
-
Page 30: Ipsec Setting
WL-ODU310 Quick Start IPSec Setting IPSec Group Setup Step 1 IPSec> Group Setup to check or modify the relevant parameter. Table 2-20 IPSec Group Setup Instruction parameter Instruction IPSec Support Standard IPSec, GRE over IPSec, L2TP over Extensions IPSec Local Security... - Page 31 WL-ODU310 Quick Start parameter Instruction Local Firewall Forwarding-firewalling for Local subnet Remote IPsec peer IP address/domain name. IP/Domain Remote IPSec remote subnet and mask. Subnet/Mask Remote Forwarding-firewalling for Remote subnet Firewall Step 2 Please click ”save” to finish. IPSec Basic Setup Step 1 IPSec >Basic Setup to check or modify the relevant parameter.
- Page 32 WL-ODU310 Quick Start parameter Instruction Encryption Phase 1 Support HASH MD5 and SHA Authentication Phase 1 SA IPSec Phase 1 SA lifetime Life Time Phase 2 DH Select Group1, Group2, Group5 from list. It must be Group matched to remote IPSec setting.
- Page 33 WL-ODU310 Quick Start Table 2-22 IPSec Advanced Setup Instruction parameter Instruction Aggressive Default for main mode Mode ID Payload Enable ID Payload compress Compress To enable DPD service ICMP ICMP Check for IPSec tunnel IPSec Custom IPSec advanced setting such as left/right ID.
Need help?
Do you have a question about the WL-ODU310 and is the answer not in the manual?
Questions and answers