Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WLINK WL-ODU300
Summary of Contents for WLINK WL-ODU300
- Page 1 Quick Start 4G/4G+ Outdoor WL-ODU300 WLINK...
-
Page 2: Table Of Contents
Contents Contents ..................... 2 Hardware Installation ................3 Packing Contents ..............3 Antenna Installation ..............4 SIM Installation ................ 4 LED Status ................7 Configuration ..................8 Login ..................8 Overview ................... 9 Traffic Stats................9 Device List ................10 Tool Column ................10 Basic Network ................ -
Page 3: Hardware Installation
Advanced Network Setting ...........24 VPN Tunnel ................28 Hardware Installation Packing Contents Mount Kits WL-ODU300 4G/Wi-Fi Antennas PoE Power Adapter... -
Page 4: Antenna Installation
Antenna Installation SIM Installation Mount Kits Installation... -
Page 7: Led Status
LED Status Indicator Note Green Good Signal Color Poor Signal Quick Blinking Offline (0.5s) Status Slow Blinking 3G online (1.5s) Solid light 4G online Green Solid light WLAN port open, but no data sending. WLAN Green Blinking quickly Data is in transmitting Green Extinguished WLAN port isn’t opened... -
Page 8: Configuration
Configuration Login To access and configure certain features of the WL-ODU300, one needs to log in to the WL-ODU300. Connect one Ethernet cable to PoE interface of device and PoE adapter, and connect other Ethernet cable between LAN of PoE adapter and PC. -
Page 9: Overview
User name: admin Password: Printed on the WL-ODU300 Label. Overview The overview GUI will be display router system information, Ethernet ports status, VPN connection status, LAN information, 4G connection information and WLAN information. Figure 2-2 Router Status GUI Traffic Stats. -
Page 10: Device List
Figure 2-3 Traffic Stats. GUI Device List Click Status->Device List to enter the device list GUI.to check the connected devices information in the list. Figure 2-4 Device List GUI Tool Column Figure 2-5 Tool Column GUI Tools Ping Click Tools->Ping to enter ping test GUI. Used to test the reachability of a host on an... - Page 11 Internet IP network and to measure the round-trip time for messages sent from the originating host to a destination server. Trace Click Tools->Trace to enter trace test GUI. diagnostic tool for displaying the routeand measuring transit delays of packets across an Internet IP network. Click Tools->...
- Page 12 Bandwidth Click Bandwidth to enter bandwidth graphic GUI. Used to check cellular/LAN/Wi-Fi real-time bandwidth. System Click system to choose software reboot, hardware reboot and logout GUI.
-
Page 13: Basic Network
Basic Network WAN Setting Step 1 Basic Network>WAN to enter below interface. Table 2-1 WAN Setting Instruction Parameter Instruction Type Support DHCP, PPPoE, Static IP address Step 2 After setting, please click “save” to finish, the device will reboot. ----End Cellular Setting Step 1 Basic Network->... - Page 14 Table 2-2 Cellular Setting Instruction Parameter Instruction Enable Modem Enable/Disable 4G mode. Use PPP ECM dialup as default and PPP optional. ICMP check If enable ICMP check and setup a reachable IP address as destination IP, the router will reconnect/reboot once ICMP check failed.
-
Page 15: Lan Setting
Parameter Instruction Check data. CIMI Send to Send CIMI to a defined IP and port by TCP protocol. SMS Code Remote control the router by SMS. Only the configured SMS code will work. Operator Lock Lock a specified operator for the router by MCC/MNC code. - Page 16 Table 2-3 LAN Setting Instruction Parameter Instruction Bridge Supports 4 LAN IP address for br0 to br3 interface. If need to support VLAN, please go to VLAN GUI. Router IP Router IP address, default IP is 192.168.1.1 Address Subnet Mask Router subnet mask, default mask is 255.255.255.0 DHCP Dynamic allocation IP service, after enable, it will show the...
-
Page 17: Vlan
Parameter Instruction Add LAN IP address, supports 4 LAN IP addresses. Step 2 After setting, please click “save” to finish, the device will reboot. ----End VLAN Step 1 Basic Network->VLAN to enter the VLAN setting page. Table 2-4 LAN Setting Instruction Parameter Instruction VLAN ID number. -
Page 18: Schedule
----End Schedule Step 1 Basic Network->VLAN to enter the Schedule setting page. Step 2 Please Click “Save“ to finish. ----End Dynamic DNS Setting Step 1 Basic Network->DDNS to enter the DDNS setting page. -
Page 19: Routing Setting
Table 2-5 DDNS Setting Instruction Parameter Instruction Default is standard DDNS protocol, for customized protocol. IP address Usually, use default IP 0.0.0.0 Auto refresh Set the interval of the DDNS client obtains new IP, suggest 240s time or above Service Select the DDNS service provider that listed. - Page 20 Table 2-6 Routing Setting Instruction Parameter Instruction Destination Router can reach the destination IP address. Gateway Next hop IP address which the router will reach Subnet mask for destination IP address Subnet Mask Metrics are used to determine whether one particular route Metric should be chosen over another.
-
Page 21: Guest
Guest Step 1 Basic Network->Guest to enter the account GUI. In this page, you can configure the basic web parameter, make it more convenient for usage. Please note the “password” is the router user account password. Step 2 Please click save iron to finish the setting. ----End WLAN Setting It’s mainly for router which support Wi-Fi, you can modify and configure WLAN... - Page 22 Parameter Instruction Radio Mode 2.4G+5G mode as default. Support 2.4G, 5G modes optional. 2.4G+5G model, Wi-Fi bandwidth for 683Mbps 2.4G model, Wi-Fi bandwidth for 300Mbps 5G model, Wi-Fi bandwidth for 866Mbps Enable wireless Enable or Disable the Wireless Wireless mode Support AP mode.
- Page 23 Security Support various encryption method as requested. Table 2-7 Basic of WLAN Setting Instruction Step 2 Please click “Save” to finish. ----End MultiSSID...
-
Page 24: Wireless Survey
Step 1 WLAN->MultiSSID Setting to configure relative parameter Step 2 Please click “Save” to finish. ----End Wireless Survey WLAN> Wireless Survey to check survey. Advanced Network Setting Port Forwarding Step 1 Advanced Network > Port Forwarding to enter the GUI, you may modify the router name, Host name and Domain name according to the application requirement. -
Page 25: Dmz Setting
Table 2-8 Port Forwarding Instruction Parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Src. Address Source IP address. Forward only if from this address. Ext. Ports External ports. The ports to be forwarded, as seen from the WAN. Int. - Page 26 Table 2-9 DMZ Instruction Parameter Instruction Destination The destination address inside the LAN. Address Source Address If no IP address inside, it will allow all IP address to access. Restriction If define IP address, it will just allow the defined IP address to access.
-
Page 27: Bandwidth Control Setting
Step 2 Please click ”save” to finish. ----End Bandwidth Control Setting Step 1 Advanced Network> Bandwidth Control to check or modify the relevant parameter. -
Page 28: Vpn Tunnel
Table 2-10 Bandwidth Control Instruction Parameter Instruction Max Available Upload Speed limit for router. IP/ IP Range/ Limit devices speed for specified IP/IP Range/ MAC Address. MAC Address DL Rate Mix Download rate DL ceil Max download rate UL Rate Mix Upload rate UL ceil Max upload rate... - Page 29 Table 2-11 PPTP/L2TP Basic Instruction Parameter Instruction VPN enable Protocol VPN Mode for PPTP and L2TP Name VPN Tunnel name Server Address VPN Server IP address. User name As the configuration requested. Password As the configuration requested. Firewall Firewall For VPN Tunnel Local IP Defined Local IP address for tunnel Table 2-12 L2TP Advanced Instruction...
- Page 30 Accept DNS As the configuration requested. MTU is 1450bytes as default MRU is 1450bytes as default Tunnel Auth. L2TP authentication Optional as the configuration requested. Tunnel As the configuration requested. Password Custom As the configuration requested. Options Table 2-13 PPTP Advanced Instruction PPTP Advanced enable Name PPTP Tunnel name...
- Page 31 Name2 VPN tunnel name Policy Support VPN tunnel backup and failover modes optional Description As the configuration requested Step 2 Please click ”save” to finish. ---End...
Need help?
Do you have a question about the WL-ODU300 and is the answer not in the manual?
Questions and answers