WLINK WL-G510 Series User Manual
  1. Manuals
  2. Brands
  3. WLINK Manuals
  4. Network Router
  5. WL-G510 Series
  6. User manual

WLINK WL-G510 Series User Manual

Industrial 4g/3g router
Hide thumbs Also See for WL-G510 Series:
Table of Contents

Advertisement

Quick Links

WL-G510 Series Router User Manual
User Manual
---Apply to WL-G510 Series Industrial 4G/3G Router
V1.0
http://www.wlink-tech.com
March, 2018
V1.0
http://www.wlink-tech.com
March, 2018
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WL-G510 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WLINK WL-G510 Series

Summary of Contents for WLINK WL-G510 Series

  • Page 1 WL-G510 Series Router User Manual User Manual ---Apply to WL-G510 Series Industrial 4G/3G Router V1.0 http://www.wlink-tech.com March, 2018 V1.0 http://www.wlink-tech.com March, 2018...
  • Page 2 WL-G510 Series Router User Manual Copyright © Shenzhen WLINK Technology Company Limited 2012 ～ 2018 Without our written approval, anyone can’t extract, copy whole or part of content of this file and can’t spread out in any format. Caution Due to product updates or functional upgrading, we may renew the content of this file, and this file only for reference.

  • Page 3: Table Of Contents

    WL-G510 Series Router User Manual Contents 1 Hardware Installation..............................4 1.1 Panel................................4 1.2 LED Status..............................6 1.3 Dimension..............................7 1.4 How to Install..............................7 2 Router Configuration............................10 2.1 Local Configure............................10 2.2 Status................................11 3.3 WLAN Setting.............................18 3.4 Advanced Network Setting........................21 3.5 Firewall................................ 29 3.6 VPN Tunnel..............................

  • Page 4: Hardware Installation

    WL-G510 Series Router User Manual Hardware Installation This chapter is mainly for installation introduction, there would be some difference between the scheme and real object. But the difference won’t have any influence to products performance. Panel Table 1-1 WL-G510 Structure WLINK Tech.
  • Page 5 WL-G510 Series Router User Manual Instruction Remark Port Main LTE antenna, SMA connector, 50Ω. LTE MIMO antenna GPS antenna, SMA connector, 50Ω. Wi-Fi1 Wi-Fi dual-band antenna, SMA connector Wi-Fi2 Wi-Fi dual-band antenna, SMA connector 10/100/1000Base-TX，MDI/MDIX self-adaption. WAN/LAN Default as LAN 10/100/1000Base-TX，MDI/MDIX self-adaption.

  • Page 6: Led Status

    WL-G510 Series Router User Manual LED Status Table 1-3 Router LED indictor Status silk-screen status Indication Signal Solid Light LED1: weak (CSQ0~10). LED2: good (CSQ11~19) LED3: strong (CSQ20~31) Signal Blink dialing Signal 1 Solid Light online Solid Light System power operation.

  • Page 7: Dimension

    WL-G510 Series Router User Manual Dimension Figure 1-2 G510 Series Router Dimension How to Install 1.4.1 SIM/UIM card install Please insert the dual SIM cards before configure the router.
  • Page 8 WL-G510 Series Router User Manual Before connecting, please disconnect any power resource of router 1.4.2 Ethernet Cable Connection Connect the router with a computer by an Ethernet cable for GUI configuration, or transit by a switch. 1.4.3 4G and Wi-Fi Antenna Plug Connect the two magnetic 4G antennas to Main and Aux interfaces, and the two paddle shape Wi-Fi antennas to Wi-Fi1 and Wi-Fi2 interfaces.

  • Page 9: Power Supply

    WL-G510 Series Router User Manual The serial port will be unavailable in WL-G510 standalone GPS model. 1.4.5 Console Port Connection Connect the router to a computer by an RJ45-DB9 cable for CLI configuration and router system debugging. Instruction Remark Input...

  • Page 10: Router Configuration

    WL-G510 Series Router User Manual Router Configuration WL-G510 Series routers support GUI and CLI configuration. This chapter introduce GUI configuration via Ethernet port, if need CLI configuration guide, please contact our technical support department by email: support@wlink-tech.com. Local Configure The router supports to be configured by local Ethernet port, you could specify a static IP or set as DHCP.

  • Page 11: Status

    WL-G510 Series Router User Manual User should use the default user name and password when log in for the first time Figure 2-4 User Identify Interface ----END Status Check routers status after login router. Figure 2-5 Router Status GUI...

  • Page 12: Wan Setting

    WL-G510 Series Router User Manual After login, router status will be show as below, then you should change the password according to the prompts. The UI will display” already changed login password successfully” after router reboot. 3.2.1 WAN Setting Step 1 Basic Network>WAN to enter below interface...
  • Page 13 WL-G510 Series Router User Manual Figure 3-2 Cellular Setting GUI Parameter Instruction Use PPP ECM dialup as default. PPP optional. ICMP check If enable ICMP check and setup a reachable IP address as destination IP, the router will reconnect/reboot once ICMP check failed.
  • Page 14 WL-G510 Series Router User Manual Parameter Instruction Dual SIM Mode 【Fail Over】Two SIM cards mutual backup. Once SIM1 failed, it’ll switch to SIM2 and work on SIM2, and vice versa. 【SIM1 Only】Only SIM1 works. 【SIM2 Only】Only SIM2 works. 【Backup】SIM1 is the primary SIM. Once SIM1 failed, it’ll switch to SIM2 and work on SIM2 for a specified period of time, then it switches back to SIM1.

  • Page 15: Lan Setting

    WL-G510 Series Router User Manual 【Cellular Traffic Check】 【Check Mode】there are Rx(Receive), Tx(Transmission) and Rx/Tx check modes. 【Rx】 Router will check the 3G/LTE cellular receiver traffic. If no receiver traffic within the defined check interval, the router will implement the specified action reconnect or reboot.

  • Page 16: Dynamic Dns Setting

    WL-G510 Series Router User Manual Figure 3-3 LAN Setting GUI Table 3-2 LAN Setting Instruction Parameter Instruction Router IP Address Router IP address, default IP is 192.168.1.1 Subnet Mask Router subnet mask, default mask is 255.255.255.0 DHCP Dynamic allocation IP service, after enable, it will show the...

  • Page 17: Routing Setting

    Table 3-3 DDNS Setting Instruction parameter Instruction Default is standard DDNS protocol, for customized protocol, please IP address contact Wlink engineer. Usually, use default IP 0.0.0.0 Auto refresh Set the interval of the DDNS client obtains new IP, suggest 240s or time above Service Select the DDNS service provider that listed.

  • Page 18: Wlan Setting

    WL-G510 Series Router User Manual Parameter Instruction Metrics are used to determine whether one particular route should Metric be chosen over another. Interface from router to gateway. Interface Description Describe this routing name. Step 2 Please Click “ Save “ to finish.
  • Page 19 WL-G510 Series Router User Manual Parameter Instruction Channel Width 20MHZ and 40MHZ alternative Security Support various encryption method Step 2 Please click “Save” to finish. ----End 3.3.2 Wireless Filter Setting Step 1 WLAN > MultiSSID 3.3.3 Wireless Filter Setting Step 1 WLAN > Wireless Filter...

  • Page 20: Advanced Wireless Setting

    WL-G510 Series Router User Manual connect the WiFi, However, this feature is invalid for wired connection application. Table 3-6 ”Wireless Client Filter” Setting Instruction Parameter Instruction Disable Filter Choose to disable Permit on the Only allow the listed MAC address to connect to router by wireless...

  • Page 21: Advanced Network Setting

    WL-G510 Series Router User Manual ----End 3.3.5 Wireless Survey Step 1 WLAN> Wireless Survey to check survey. Figure 3-9 Wireless Survey Setting GUI ----End Advanced Network Setting 3.4.1 Port Forwarding Step 1 Advanced Network > Port Forwarding to enter the GUI, you may modify the router...
  • Page 22 WL-G510 Series Router User Manual Figure 3-10 Port Forwarding GUI Table 3-7 “Port Forwarding” Instruction Parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Src. Address Source IP address. Forward only if from this address. Ext. Ports External ports. The ports to be forwarded, as seen from the WAN.

  • Page 23: Dmz Setting

    WL-G510 Series Router User Manual Parameter Instruction Int Port Internal port. Dst. Address The redirecting IP address. Ext. Ports External port for redirection. Description Remark the rule Step 2 Please click ”save” to finish ----End 3.4.3 DMZ Setting Step 1 Advanced Network> DMZ to check or modify the relevant parameter.
  • Page 24 WL-G510 Series Router User Manual 3.4.4 IP Passthrough Setting Step 1 Advanced Network> IP Passthrough to check or modify the relevant parameter. Figure 3-13 IP Passthrough GUI Table 3-10 “IP Passthrough” Instruction parameter Instruction Enable Enable IP Passthrough MAC Address Enable DHCP of device.
  • Page 25 WL-G510 Series Router User Manual Figure 3-14 Triggered GUI Table 3-11 “Triggered” Instruction parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Triggered Ports Trigger Ports are the initial LAN to WAN "trigger". Transferred Forwarded Ports are the WAN to LAN ports that are Ports opened if the "trigger"...
  • Page 26 WL-G510 Series Router User Manual Figure 3-15 Serial App Setting GUI Table 3-12 “Serial App” Instruction Parameter Instruction Serial to TC/IP Support Disable, Server and Client mode. Such as Client. mode Server IP/Port IP address and domain name are acceptable for Server IP...
  • Page 27 WL-G510 Series Router User Manual Serial port connection PINs DB9(male) ---- ---- ---- DI-1 DI-2 DI-3 Step 2 Please click ”save” to finish. ----End 3.4.7 UPnp/NAT-PMP Setting Step 1 Advanced Network> Upnp/NAT-PMP to check or modify the relevant parameter. Figure 3-16 UPnp/NAT-PMP Setting GUI Step 2 Please click ”save”...
  • Page 28 WL-G510 Series Router User Manual Figure 3-17 Bandwidth Control Setting GUI Step 2 Please click ”save” to finish. ----End 3.4.9 VRRP Setting Step 1 Advanced Network> Static DHCP to check or modify the relevant parameter. Figure 3-18 VRRP Setting GUI Step 2 Please click ”save”...

  • Page 29: Firewall

    WL-G510 Series Router User Manual 3.4.10 Static DHCP Setting Step 1 Advanced Network> Static DHCP to check or modify the relevant parameter. Figure 3-19 Static DHCP Setting GUI Step 2 Please click ”save” to finish. ----End Firewall 3.5.1 IP/URL Filtering...

  • Page 30: Domain Filtering

    WL-G510 Series Router User Manual Table 3-13 “IP/URL Filtering” Instruction Parameter Instruction IP/MAC/Port Support IP address, MAC address and port filter. Filtering Accept/Drop options for filter policy. Key Word Support key word filter. Filtering URL Filtering Support URL filter. Access Filtering Support Access Filter.

  • Page 31: Vpn Tunnel

    WL-G510 Series Router User Manual Figure 3-20 Domain Filtering Setting GUI Table 3-14 “GRE” Instruction Parameter Instruction Default Policy Support black list and white list Local IP Local IP address for LAN. Address Domain Support Domain filter. Step 2 Please click ”save” to finish.
  • Page 32 WL-G510 Series Router User Manual Figure 3-21 GRE Setting GUI Table 3-15 “GRE” Instruction Parameter Instruction GRE tunnel number Tunnel Address GRE Tunnel local IP address which is a virtual IP address. Tunnel Source Router’s 3G/WAN IP address. Tunnel Destination GRE Remote IP address.
  • Page 33 WL-G510 Series Router User Manual Table 3-16 “OpenVPN” Instruction Parameter Instruction Start with WAN Enable the Openvpn feature for 4G/3G/WAN port. Interface Type Tap and Tun type are optional. Tap is for bridge mode and Tunnel is for routing mode.
  • Page 34 WL-G510 Series Router User Manual Parameter Instruction Redirect Internet Configure Openvpn as default routing. Traffic Access DNS As the configuration requested. Encryption As the configuration requested. Compression As the configuration requested. TLS Renegotiation TLS negotiation time. -1 as default for 60s.
  • Page 35 WL-G510 Series Router User Manual Parameter Instruction Status Check Openvpn status and data statistics. Step 2 Please click ”save” to finish. ----End 3.6.3 VPN Client Setting Step 1 VPN Tunnel> VPN Client to check or modify the relevant parameter.
  • Page 36 WL-G510 Series Router User Manual Table 3-17 “PPTP/L2TP Basic” Instruction parameter Instruction VPN enable Protocol VPN Mode for PPTP and L2TP Name VPN Tunnel name Server Address VPN Server IP address. User name As the configuration requested. Password As the configuration requested.
  • Page 37 WL-G510 Series Router User Manual Table 3-20 “SCHEDULE” Instruction VPN SCHEDULE feature enable Name1 VPN tunnel name Name2 VPN tunnel name Policy Support VPN tunnel backup and failover modes optional Description As the configuration requested Step 2 Please click ”save” to finish.
  • Page 38 WL-G510 Series Router User Manual Table 3-21 “ IPSec Group Setup” Instruction parameter Instruction IPSec Support Standard IPSec, GRE over IPSec, L2TP over Extensions IPSec Local Security Defined the IPSec security interface Interface Local IPSec local subnet and mask. Subnet/Mask...
  • Page 39 WL-G510 Series Router User Manual Table 3-22 “ IPSec Basic Setup” Instruction parameter Instruction Keying Mode IKE preshared key Phase 1 DH Select Group1, Group2, Group5 from list. It must be Group matched to remote IPSec setting. Phase 1 Support 3DES, AES-128, AES-192, AES-256...

  • Page 40: Administration

    WL-G510 Series Router User Manual Table 3-23 “ IPSec Advanced Setup” Instruction parameter Instruction Aggressive Default for main mode Mode ID Payload Enable ID Payload compress Compress To enable DPD service ICMP ICMP Check for IPSec tunnel IPSec Custom IPSec advanced setting such as left/right ID.
  • Page 41 WL-G510 Series Router User Manual Figure 3-23 Router Identification GUI Table 3-24 “Router Identification” Instruction Parameter Instruction Router name Default is router, can be set maximum 32 character Host name Default is router, can be set maximum 32 character Domain name...

  • Page 42: Time Setting

    WL-G510 Series Router User Manual 3.7.2 Time Setting Step 1 Please click “Administrator> time” to check or modify the relevant parameter. Figure 3-24 System Configuration GUI If the device is online but time update is fail, please try other NTP Time Server.
  • Page 43 WL-G510 Series Router User Manual 3.7.3 Admin Access Setting Step 1 Please click “Administrator>Admin” to check and modify relevant parameter. In this page, you can configure the basic web parameter, make it more convenient for usage. Please note the “password” is the router system account password.

  • Page 44: Snmp Setting

    WL-G510 Series Router User Manual 3.7.4 Schedule Reboot Setting Step 1 Please click “Administrator>Schedule Reboot” to check and modify relevant parameter. Figure 3-26 Scheduler Reboot Setting GUI Step 2 Please click save iron to finish the setting ----End 3.7.5 SNMP Setting...
  • Page 45 WL-G510 Series Router User Manual Figure 3-27 SNMP Setting GUI Step 2 Please click save iron to finish the setting ----End 3.7.6 M2M Access Setting (Apply to M2M Management Platform installation application only) Step 1 Please click “Administrator>M2M Access” to check and modify relevant...
  • Page 46 WL-G510 Series Router User Manual Figure 3-28 M2M Access Setting GUI Step 2 Please click save iron to finish the setting ----End 3.7.7 DI/DO Setting Step 1 Please click “Administrator>DI/DO Setting” to check and modify relevant parameter. Figure 3-29 DI/DO Setting GUI...
  • Page 47 WL-G510 Series Router User Manual Table 3-25 “DI” Instruction Parameter Instruction Enable Enable DI. Port1 is for I/O1 and Port2 is I/O2. Both I/O1 and I/O2 are DI ports Mode Selected from OFF, ON and EVENT_COUNTER modes. OFF Mode: When I/O connects to GND, it will trigger alarm.
  • Page 48 WL-G510 Series Router User Manual Parameter Instruction switches and counts events according to the ON/OFF status. When LO_TO_HI is selected, the counter value increase when the attached switch is pushed. When HI_TO_LO is selected, the counter value increases when the switch is pushed and released.
  • Page 49 WL-G510 Series Router User Manual Parameter Instruction receiving SMS from the number in phone book. M2M Control: it’s not ready. Alarm Action Digital Output initiates when there is an alarm. Selected from “OFF”, “ON”, “Pulse”. OFF: Open from GND when triggered.
  • Page 50 WL-G510 Series Router User Manual 3.7.8 Configuration Setting Step 1 Please click “ Administrator> Configuration ” to do the backup setting Figure 3-30 Backup and Restore Configuration GUI Restore Default would lose all configuration information, please be careful. Step 2 After setting the backup and restore configuration. The system will reboot automatically.

  • Page 51: System Log Setting

    WL-G510 Series Router User Manual 3.7.9 System Log Setting Step 1 Please click “Administrator> Logging” to start the configuration, you can set the file path to save the log (Local or remote sever). Figure 3-31 System log Setting GUI Step 2 After configure, please click “Save” to finish.

  • Page 52: Debugging Setting

    WL-G510 Series Router User Manual 3.7.10 Firmware upgrade Step 1 Please click “Administrator>firmware upgrade” to open upgrade firmware tab. Figure 3-32 Firmware Upgrade GUI When upgrading, please don’t cut off the power. 3.7.11 System Reboot Step 1 Please click “Administrator>Reboot” to restart the router. System will popup dialog to remind “Yes”...
  • Page 53 WL-G510 Series Router User Manual Figure 3-33 Logs GUI ----End 3.8.2 Ping Setting Step 1 Please click “Debugging>Ping” to check and modify relevant parameter. Figure 3-34 Ping GUI ----End 3.8.3 Trace Setting Step 1 Please click “Debugging>Trace” to check and modify relevant parameter.
  • Page 54 WL-G510 Series Router User Manual Figure 3-35 Trace GUI ----End...

  • Page 55: Reset" Button For Restore Factory Setting

    WL-G510 Series Router User Manual “Reset” Button for Restore Factory Setting If you couldn’t enter web interface for other reasons, you can also use this way. “Reset” button is near to Console port in WL-G510 panel, This button can be used when the router is in use or when the router is turned on.

  • Page 56: Appendix (For Advanced Optional Features Only)

    WL-G510 Series Router User Manual 3.10 Appendix (For advanced optional features only) 3.10.1 GPS Setting Step 1 Please click “Advanced Network> GPS” to view or modify the relevant parameter. Figure 3-36 GPS Setting GUI Table 3-28 “GPS” Instruction parameter Instruction...
  • Page 57 WL-G510 Series Router User Manual 2. Example 0001_R081850ac,150904,043215.0,06,2234.248130,N,11356.626179,E,0.0,91.5,1,1.2,9 3. GPS data description Field Name Format Example Description Router ID String 0001_R081850 0001 customizable product router indicator. 081850ac Last 8digits of routers MAC address. gps_date yymmdd 150904 Date in year,month,day gps_time 043215.0...
  • Page 58 Ex-storage: Captive portal file is in extended storage such as SD card. Web Host Configure domain name for the captive portal access. For example, Configure as wlink.tech.com, we might directly access to captive portal page in the website as wlink.tech.com Portal Host Reserved.
  • Page 59 WL-G510 Series Router User Manual Parameter Instruction MAC Whitelist No captive portal page for Wi-Fi device. Download QoS Enable to apply the Download and Upload per user limits. Upload Qos Maximum download speed available to each user. 1）Upload Portal file and Splash.html by local Upload portal images and splash.html in router for the Slider (0001_portal.png,...
  • Page 60 WL-G510 Series Router User Manual ---End...
  • Page 61 WL-G510 Series Router User Manual 2）Modify portal file storage path Modify portal file storage for In-storage as below. 3.10.3 OpenVPN Demo (TAP Mode) 1) Network topology 2) OpenVPN Server Config Demo...
  • Page 62 WL-G510 Series Router User Manual...
  • Page 63 WL-G510 Series Router User Manual 3) OpenVPN Client Config Demo...
  • Page 64 WL-G510 Series Router User Manual...
  • Page 65 WL-G510 Series Router User Manual...

Table of Contents