1. Manuals
  2. Brands
  3. WLINK Manuals
  4. Network Router
  5. WL-G510 Series
  6. User manual

WLINK WL-G510 Series User Manual

Industrial 4grouter
Hide thumbs Also See for WL-G510 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
WL-G510 Series Router User Manual
User Manual
---Apply to WL-G510 Series Industrial 4G Router
V1.0
http://www.wlink-tech.com
March, 2018
V3.9
http://www.wlink-tech.com
Feb, 2025
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WL-G510 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WLINK WL-G510 Series

Summary of Contents for WLINK WL-G510 Series

  • Page 1 WL-G510 Series Router User Manual User Manual ---Apply to WL-G510 Series Industrial 4G Router V1.0 http://www.wlink-tech.com March, 2018 V3.9 http://www.wlink-tech.com Feb, 2025...
  • Page 2 WL-G510 Series Router User Manual Copyright © Shenzhen WLINK Technology Company Limited 2012 ～ 2025 Without our written approval, anyone can’t extract, copy whole or part of content of this file and can’t spread out in any format. Caution Due to product updates or functional upgrading, we may renew the content of this file, and this file only for reference.

  • Page 3: Table Of Contents

    WL-G510 Series Router User Manual Contents 1 Hardware Installation ............................. 4 1.1 Panel ................................4 1.2 LED Status ..............................6 1.3 Dimension ..............................6 1.4 How to Install ............................... 7 2 Router Configuration ............................10 2.1 Local Configure ............................10 2.2 Status ................................11 2.3 Tool Column ...............................

  • Page 4: Hardware Installation

    WL-G510 Series Router User Manual Hardware Installation This chapter is mainly for installation introduction, there would be some difference between the scheme and real object. But the difference won’t have any influence to products performance. Panel Table 1-1 WL-G510 Structure WLINK Tech.
  • Page 5 WL-G510 Series Router User Manual Instruction Remark Port LTE MIMO antenna GPS antenna, SMA connector, 50Ω. Wi-Fi1 Wi-Fi dual-band antenna, SMA connector Wi-Fi2 Wi-Fi dual-band antenna, SMA connector 10/100/1000Base-TX，MDI/MDIX self-adaption. WAN/LAN Default as LAN 10/100/1000Base-TX，MDI/MDIX self-adaption. Reset Reset button, (press on button at least 5 seconds) Power connector 7.5～32VDC...

  • Page 6: Led Status

    WL-G510 Series Router User Manual LED Status Table 1-3 Router LED indictor Status silk-screen status Indication Signal Constant LED1: weak (CSQ0~10). light LED2: good (CSQ11~19) LED3: strong (CSQ20~31) Signal Blink dialing Signal 1 Constant online light Constant Light System power operation.

  • Page 7: How To Install

    WL-G510 Series Router User Manual Figure 1-2 G510 Series Router Dimension How to Install 1.4.1 SIM/UIM card install Please insert the dual SIM cards before configure the router.

  • Page 8: Ethernet Cable Connection

    WL-G510 Series Router User Manual Before connecting, please disconnect any power resource of router 1.4.2 Ethernet Cable Connection Connect the router with a computer by an Ethernet cable for GUI configuration, or transit by a switch. 1.4.3 4G and Wi-Fi Antenna Plug Connect the two magnetic 4G antennas to Main and Aux interfaces, and the two paddle shape Wi-Fi antennas to Wi-Fi1 and Wi-Fi2 interfaces.

  • Page 9: Console Port Connection

    WL-G510 Series Router User Manual The serial port will be unavailable in WL-G510 standalone GPS model. 1.4.5 Console Port Connection Connect the router to a computer by an RJ45-DB9 cable for CLI configuration and router system debugging. Instruction Remark Input...

  • Page 10: Router Configuration

    WL-G510 Series Router User Manual Router Configuration WL-G510 Series routers support GUI and CLI configuration. This chapter introduce GUI configuration via Ethernet port, if need CLI configuration guide, please contact our technical support department by email: support@wlink-tech.com. Local Configure The router supports to be configured by local Ethernet port, you could specify a static IP or set as DHCP.

  • Page 11: Status

    WL-G510 Series Router User Manual User should use the default user name and password when log in for the first time Figure 2-2 User Identify Interface ----END Status Check routers information such as status, traffic Stats and device list after login router.

  • Page 12: Device List

    WL-G510 Series Router User Manual Figure 2-3 Router Status GUI 2.2.2 Traffic Stats. Click Status->Traffic Stats. to enter the traffic stats.GUI.to check Cellular/WAN traffic in real-time. Figure 2-4 Traffic Stats. GUI 2.2.3 Device List Click Status->Device List to enter the device list GUI.to check the connected devices...

  • Page 13: Tool Column

    WL-G510 Series Router User Manual Figure 2-5 Device List GUI Tool Column Figure 2-6 Tool Column GUI 2.3.2 Tools 2.3.2.1 Ping Click Tools->Ping to enter ping test GUI. Used to test the reachability of a host on an Internet IP network and to measure the round-trip time for messages sent from the originating host to a destination server.
  • Page 14 WL-G510 Series Router User Manual 2.3.2.3 WOL Click Tools-> WOL to enter WOL(Wake On Lan) GUI. Used to wake up those connected devices via WOL protocol. Clock left mouse button to wake up the device. 2.3.2.4 Log Click Tools-> Log to enter Log GUI. Use to check logs in GUI, download GUI and send logs to server.

  • Page 15: Basic Network

    WL-G510 Series Router User Manual Click Tools-> Capture to enter capture data GUI. Use to capture LAN/WAN data packet to analyse what happen in the router. 2.3.3 Bandwidth Click Bandwidth to enter bandwidth graphic GUI. Used to check cellular/LAN/Wi-Fi real-time bandwidth.
  • Page 16 WL-G510 Series Router User Manual Table 2-1 WAN Setting Instruction Parameter Instruction Disabled Turn off the WAN Ethernet port DHCP WAN port automatically get an IP address PPPoE WAN port to get network via PPPOE dial-up Static Address WAN port to get network via a static IP address Step 2 After setting, please click “save”...
  • Page 17 WL-G510 Series Router User Manual Table 2-2 WAN Setting Instruction Parameter Instruction Enable Modem Enable/Disable 4G mode. Use PPP ECM dialup as default. PPP optional. ICMP check If enable ICMP check and setup a reachable IP address as destination IP, the router will reconnect/reboot once ICMP check failed.
  • Page 18 WL-G510 Series Router User Manual Parameter Instruction CIMI Send to Send CIMI to a defined IP and port by TCP protocol. SMS Code Remote control the router by SMS. Only the configured SMS code will work. Operator Lock Lock a specified operator for the router by MCC/MNC code.

  • Page 19: Lan Setting

    WL-G510 Series Router User Manual 【Cellular Traffic Check】 【Check Mode】there are Rx(Receive), Tx(Transmission) and Rx/Tx check modes. 【Rx】 Router will check the 3G/LTE cellular receiver traffic. If no receiver traffic within the defined check interval, the router will implement the specified action reconnect or reboot.
  • Page 20 WL-G510 Series Router User Manual Table 2-3 LAN Setting Instruction Parameter Instruction Bridge Supports 4 LAN IP address for br0 to br3 interface. If need to support VLAN, please go to VLAN GUI. Router IP Address Router IP address, default IP is 192.168.1.1 Subnet Mask Router subnet mask, default mask is 255.255.255.0...
  • Page 21 WL-G510 Series Router User Manual Table 2-4 LAN Setting Instruction Parameter Instruction VLAN ID number. The VID range is from 1 to 15. LAN1~LAN4, Tagged Enable to make router can encapsulate and de-encapsulate the VLAN tag. Bridge Routers interface br0, br1, br2, br3 and WAN Step 2 Please Click “Save“...
  • Page 22 WL-G510 Series Router User Manual Parameters Instruction modem The router dial-up to network via modem The router dial-up to network via WAN (DHCP, PPPOE, Static IP) port. ICMP Check When the ICMP Check fails, the switching action between Link1 and Link2 will be triggered.

  • Page 23: Dynamic Dns Setting

    WL-G510 Series Router User Manual The VLAN should be configured with WAN and 4G backup together. Please define WAN port as bridge WAN interface in the VLAN GUI as below. Step 2 Please Click “Save“ to finish. Please check lock bank configuration in the chapter 3 as reference.

  • Page 24: Routing Setting

    Table 2-5 DDNS Setting Instruction parameter Instruction Default is standard DDNS protocol, for customized protocol, please IP address contact Wlink engineer. Usually, use default IP 0.0.0.0 Auto refresh Set the interval of the DDNS client obtains new IP, suggest 240s or time above Service Select the DDNS service provider that listed.

  • Page 25: Wlan Setting

    WL-G510 Series Router User Manual Table 2-6 Routing Setting Instruction Parameter Instruction Destination Router can reach the destination IP address. Gateway Next hop IP address which the router will reach Subnet Mask Subnet mask for destination IP address Metrics are used to determine whether one particular route should Metric be chosen over another.
  • Page 26 WL-G510 Series Router User Manual...
  • Page 27 WL-G510 Series Router User Manual Table 2-7 Basic of WLAN Setting Instruction Parameter Instruction Radio Mode 2.4G+5G mode as default. Support 2.4G, 5G modes optional. 2.4G+5G model, Wi-Fi bandwidth for 683Mbps 2.4G model, Wi-Fi bandwidth for 300Mbps 5G model, Wi-Fi bandwidth for 866Mbps...
  • Page 28 WL-G510 Series Router User Manual Step 2 Please click “Save” to finish. ----End 2.5.2 MultiSSID Step 1 WLAN->MultiSSID to configure relative parameter. Table 2-8 MultiSSID of WLAN Setting Instruction Parameter Instruction Overview SSID List including Interface, Status, SSID name, mode.

  • Page 29: Wireless Survey

    WL-G510 Series Router User Manual ----End 2.5.3 Wireless Survey Click WLAN> Wireless Survey to survey the near wireless sites information. Advanced Network Setting 2.6.1 Port Forwarding Step 1 Advanced Network > Port Forwarding to enter the GUI, you may modify the router name, Host name and Domain name according to the application requirement.
  • Page 30 WL-G510 Series Router User Manual Parameter Instruction Ext. Ports External ports. The ports to be forwarded, as seen from the WAN. Int. Port Internal port. The destination port inside the LAN. If blank, the destination port is the same as Ext Ports. Only one port per entry is supported when forwarding to a different internal port.

  • Page 31: Dmz Setting

    WL-G510 Series Router User Manual Parameter Instruction Description Remark the rule Step 2 Please click ”save” to finish The Port redirecting feature will be unavailable when enable Captive Portal function. Please check lock bank configuration in the chapter 3 as reference.

  • Page 32: Ip Passthrough Setting

    WL-G510 Series Router User Manual 2.6.4 IP Passthrough Setting Step 1 Advanced Network> IP Passthrough to check or modify the relevant parameter. Table 2-12 IP Passthrough Instruction parameter Instruction Enable Enable IP Passthrough MAC Address Enable DHCP of device. Configure device Mac.
  • Page 33 WL-G510 Series Router User Manual Table 2-13 Triggered Instruction parameter Instruction Protocol Support UDP, TCP, both UDP and TCP Triggered Ports Trigger Ports are the initial LAN to WAN "trigger". Transferred Forwarded Ports are the WAN to LAN ports that are Ports opened if the "trigger"...

  • Page 34: Serial App. Setting

    Ex-storage: Captive portal file is in extended storage such as SD card. Web Host Configure domain name for the captive portal access. For example, Configure as wlink.tech.com, we might directly access to captive portal page in the website as wlink.tech.com Portal Host Reserved.
  • Page 35 WL-G510 Series Router User Manual Table 2-15 Serial App Instruction Parameter Instruction Serial to TC/IP Support Disable, Server and Client mode. Such as Client. mode Server IP/Port IP address and domain name are acceptable for Server IP Socket Type Support TCP/UDP protocol...
  • Page 36 WL-G510 Series Router User Manual Parameter Instruction Socket Timeout Router will wait the setting time to transmit data to serial port. Serial Timeout Serial Timeout is the waiting time for transmitting the data package that is less the Packet payload. If the last package equals to the Packet payload, Serial port will transmit it immediately.

  • Page 37: Gps Setting

    WL-G510 Series Router User Manual Table 2-16 AT over IP Instruction Parameter Instruction Mode Disable/Enable optional. Disable as default. Type UPD/TCP optional. Local IP Input the router local IP address. The feature will act as server mode. Local Port Input router local IP and port.
  • Page 38 WL-G510 Series Router User Manual Table 2-17 AT over IP Instruction Parameter Instruction Mode Disable/Client/Server optional. Disable as default. Data Format NMEA/M2M_FMT optional. MNEA data format for standard GPS(GNSS) data. M2M_FMAT data format for simple GPS data in order to save data traffic.

  • Page 39: Bandwidth Control Setting

    WL-G510 Series Router User Manual Step 2 Please click ”save” to finish. ----End 2.6.11 Bandwidth Control Setting Step 1 Advanced Network> Bandwidth Control to check or modify the relevant parameter. Table 2-18 Bandwidth Control Instruction Max Available Download Speed limit for router.

  • Page 40: Vrrp Setting

    WL-G510 Series Router User Manual total speed for all of device. Step 2 Please click ”save” to finish. ----End 2.6.12 VRRP Setting Step 1 Advanced Network> VRRP to check or modify the relevant parameter. Parameter Instruction Mode Backup / Master...

  • Page 41: Static Dhcp Setting

    WL-G510 Series Router User Manual Please check lock bank configuration in the chapter 3 as reference. ----End 2.6.13 Static DHCP Setting Step 1 Advanced Network> Static DHCP to check or modify the relevant parameter. Parameter Instruction MAC Address 6-byte, 48-bit format...
  • Page 42 WL-G510 Series Router User Manual Table 2-19 IP/URL Filtering Instruction Parameter Instruction IP/MAC/Port Support IP address, MAC address and port filter. Filtering Accept/Drop options for filter policy. Key Word Support key word filter. Filtering URL Filtering Support URL filter. Access Filtering...

  • Page 43: Domain Filtering

    WL-G510 Series Router User Manual Step 2 Please click ”save” to finish. ---End 2.7.2 Domain Filtering Step 1 Firewall> Domain Filtering to check or modify the relevant parameter. Table 2-20 Domain Filtering Instruction Parameter Instruction Default Policy Support black list and white list Local IP Local IP address for LAN.

  • Page 44: Openvpn Client Setting

    WL-G510 Series Router User Manual Table 2-21 GRE Instruction Parameter Instruction GRE tunnel number Tunnel Address GRE Tunnel local IP address which is a virtual IP address. Tunnel Source Router’s 3G/WAN IP address. Tunnel Destination GRE Remote IP address. Usually a public IP address Keep alive GRE tunnel keep alive to keep GRE tunnel connection.
  • Page 45 WL-G510 Series Router User Manual Table 2-22 Basic of OpenVPN Instruction Parameter Instruction Start with WAN Enable the Openvpn feature for 4G/3G/WAN port. Interface Type Tap and Tun type are optional. Tap is for bridge mode and Tunnel is for routing mode.
  • Page 46 WL-G510 Series Router User Manual Parameter Instruction Authentication HMAC authorization As the configuration requested. Create NAT on Configure NAT in Openvpn tunnel. tunnel Table 2-23 Advanced of OpenVPN Instruction Parameter Instruction Poll Interval Openvpn client check router’s status as interval time.
  • Page 47 WL-G510 Series Router User Manual Table 2-24 Keys of OpenVPN Instruction Parameter Instruction Keep certificate as the same as server Certificate Authority Client Certificate Keep client certificate as the same as server Client Key Keep client key as the same as server...
  • Page 48 WL-G510 Series Router User Manual Table 2-26 PPTP/L2TP Basic Instruction parameter Instruction VPN enable Protocol VPN Mode for PPTP and L2TP Name VPN Tunnel name Server Address VPN Server IP address. User name As the configuration requested. Password As the configuration requested.
  • Page 49 WL-G510 Series Router User Manual Password Custom As the configuration requested. Options Table 2-28 PPTP Advanced Instruction PPTP Advanced enable Name PPTP Tunnel name Accept DNS As the configuration requested. MTU is 1450bytes as default MRU is 1450bytes as default...

  • Page 50: Ipsec Setting

    WL-G510 Series Router User Manual 2.8.4 IPSec Setting 2.8.4.1 IPSec Group Setup Step 1 IPSec> Group Setup to check or modify the relevant parameter. Table 2-30 IPSec Group Setup Instruction parameter Instruction IPSec Support Standard IPSec, GRE over IPSec, L2TP over...
  • Page 51 WL-G510 Series Router User Manual parameter Instruction IP/Domain Remote IPSec remote subnet and mask. Subnet/Mask Remote Forwarding-firewalling for Remote subnet Firewall Step 2 Please click ”save” to finish. 2.8.4.2 IPSec Basic Setup Step 1 IPSec >Basic Setup to check or modify the relevant parameter.
  • Page 52 WL-G510 Series Router User Manual parameter Instruction Authentication Phase 1 SA IPSec Phase 1 SA lifetime Life Time Phase 2 DH Select Group1, Group2, Group5 from list. It must be Group matched to remote IPSec setting. Phase 2 Support 3DES, AES-128, AES-192, AES-256...
  • Page 53 WL-G510 Series Router User Manual parameter Instruction ID Payload Enable ID Payload compress Compress To enable DPD service ICMP ICMP Check for IPSec tunnel IPSec Custom IPSec advanced setting such as left/right ID. Options Step 2 Please click ”save” to finish.

  • Page 54: Administration

    WL-G510 Series Router User Manual Administration 2.9.1 Identification Setting Step 1 Please click ”Administrator> Identification” to enter the GUI, you may modify the router name, Host name and Domain name according to self-requirement. Table 2-34 Router Identification Instruction Parameter Instruction...

  • Page 55: Time Setting

    WL-G510 Series Router User Manual 2.9.2 Time Setting Step 1 Please click “Administrator> time” to check or modify the relevant parameter. Parameter Instruction Router time The current system time of the router Time Zone Configurable time zones Auto Daylight Automatic synchronisation for countries or regions with...
  • Page 56 WL-G510 Series Router User Manual If the device is online but time update is fail, please try other NTP Time Server. Step 2 Please click “save to finish. ----End...

  • Page 57: Admin Access Setting

    WL-G510 Series Router User Manual 2.9.3 Admin Access Setting Step 1 Please click “Administrator>Admin” to check and modify relevant parameter. Parameter Instruction Web Style GUI2.0/GUI3.0 Local Access Disabled/HTTP/HTTPS/HTTP&HTTPS, configure the type of protocol that the router GUI can be accessed by the LAN...

  • Page 58: Schedule Reboot Setting

    WL-G510 Series Router User Manual Step 2 Please click save iron to finish the setting We can configure the basic web parameter, make it more convenient for usage. Please note the “password” is the router system account password. ----End 2.9.4 HTTPs Certificate Setting Step 1 Please click “Administrator>HTTPS Certificate”...

  • Page 59: Snmp Setting

    WL-G510 Series Router User Manual Parameter Instruction Enabled Enabled/Disable Time Select the timed reboot point Days Configure the router need to reboot regularly every day or a few days a week Step 2 Please click save iron to finish the setting ----End 2.9.6...

  • Page 60: Storage Setting

    WL-G510 Series Router User Manual Parameter Instruction Remote Access Whitelist IPs that allow external network access to the router GUI, with multiple IPs separated by commas System Name The system name of router in SNMP Location The location of router in SNMP...
  • Page 61 WL-G510 Series Router User Manual Parameter Instruction Upload new file The feature is suitable for captive portal files and Current file list List the uploaded file in the router storage. Step 2 Please click save iron to finish the setting ----End 2.9.8...
  • Page 62 WL-G510 Series Router User Manual Parameter Instruction Server Port Named-Pipe Offline/Online Status Named-Pipe After a successful connection between the peer-to-peer and the Address M2M server, the router will get a virtual address Step 2 Please click save iron to finish the setting ----End 2.9.9...
  • Page 63 WL-G510 Series Router User Manual Parameter Instruction Address of the TR069 server Step 2 Please click save iron to finish the setting Please check lock bank configuration in the chapter 3 as reference. ----End 2.1.1 DI/DO Setting Step 1 Please click “Administrator>DI/DO Setting” to check and modify relevant parameter.
  • Page 64 WL-G510 Series Router User Manual Table 2-36 DI Instruction Parameter Instruction Enable Enable DI. Port1 is for I/O1 and Port2 is I/O2. Both I/O1 and I/O2 are DI ports Mode Selected from OFF, ON and EVENT_COUNTER modes. OFF Mode: DI from high level(3.3v~5V) to low level(0V), it will trigger alarm.
  • Page 65 WL-G510 Series Router User Manual Parameter Instruction Under EVENT_COUNTER mode, if first pulse shape and last pulse shape are not the same level, WL-G510 will trigger alarm according to Counter Action setting. Counter Trigger Available when DI under Event Counter mode Input from 0 to 100.
  • Page 66 WL-G510 Series Router User Manual EVENT_COUNTER Model The counted number of pulses will be triggered. 2.9.7.2 DO Configure Table 2-37 DO Instruction Parameter Instruction Enable 1 DO as selected Alarm Source Digital output initiates according to different alarm source. Select from DI Alarm, SMS Control and M2M Control. Selections can be one or more.
  • Page 67 WL-G510 Series Router User Manual Parameter Instruction SMS Control: Digital Output triggers the related action when receiving SMS from the number in phone book. M2M Control: it’s not ready. Alarm Action Digital Output initiates when there is an alarm. Selected from “OFF”, “ON”, “Pulse”.

  • Page 68: Configuration Setting

    WL-G510 Series Router User Manual DO might be customized pulse width ratio: T1, T2 duration and n value. 2.1.2 Configuration Setting Step 4 Please click “ Administrator> Configuration ” to do the backup setting Parameter Instruction Backup Click the Backup button to save a copy of the router's current...
  • Page 69 WL-G510 Series Router User Manual Step 5 After setting the backup and restore configuration. The system will reboot automatically. ----End...

  • Page 70: System Log Setting

    WL-G510 Series Router User Manual 2.1.3 System Log Setting Step 6 Please click “Administrator> Logging” to start the configuration, you can set the file path to save the log (Local or remote sever). Parameter Instruction Log Internally Enable the router to print log in Tools > Log...

  • Page 71: Firmware Upgrade

    WL-G510 Series Router User Manual 2.1.4 Firmware upgrade Step 8 Please click “Administrator>firmware upgrade” to open upgrade firmware tab. Parameter Instruction Upgrade Firmware Select the firmware of the router you want to upgrade (please make sure the firmware is adapted to the current...
  • Page 72 WL-G510 Series Router User Manual The system will be reverted to factory. Table 2-38 System Default Instruction Parameter Default setting LAN IP 192.168.1.1 LAN Subnet Mask 255.255.255.0 DHCP server Enable User Name admin Password admin After reboot, the previous configuration would be deleted and restore to factory...

  • Page 73: Configuration Instance

    WL-G510 Series Router User Manual Configuration Instance This chapter is mainly for configured test case, there would be some difference between the scheme and real object. But the difference doesn’t have any influence to products performance. 3.1 VLAN WL-G510 supports VLAN partition based on Ethernet port (LAN1~LAN4)
  • Page 74 WL-G510 Series Router User Manual 2) If untag for br1 ad br2, it won’t be accessed between SW1 and SW2. 3) If tag for br1 and br2, it will be accessed between sw1 and sw2.

  • Page 75: Wan Backup (Wan As Main, Cellular Backup)

    WL-G510 Series Router User Manual ---End 3.2 WAN Backup (WAN as Main, Cellular Backup) The WAN and Cellular backup feature can quickly switch traffic to Cellular (link2) when WAN (link1) fails, and WL-G510 brings you a stable network experience. 1) Navigate to Basic Network > WAN, you may configure the WAN parameters with your situation 2) Navigate to Basic Network >...
  • Page 76 WL-G510 Series Router User Manual 4) Navigate to Basic Network > Schedule, configure WAN (Link1) preferred, Cellular backup (Link2) Add ICMP Check to WAN Set the working mode (Schedule) Parameters Instruction modem The router dial-up to network via modem The router dial-up to network via WAN (DHCP, PPPOE, Static IP) Ethernet...

  • Page 77: Port Forwarding

    WL-G510 Series Router User Manual 6) The system quickly switches traffic to Cellular when the WAN fails ---End 3.3 Port Forwarding 1) The router online and got a public IP address 14.31.134.94 Note: It’s based on SIM card carrier 2) The PC is connected to router and got IP address 192.168.1.24...

  • Page 78: Port Redirecting

    WL-G510 Series Router User Manual 4) The PC can be accessed via 14.31.134.94:443 over Internet ---End 3.4 Port Redirecting Please click “Advanced Network> Port Redirecting” to check or modify the relevant parameter. Configure Internal port as 8000, the Destination IP address as 119.136.206.2 and External port 60080(M2M Platform Server IP and Port as example).

  • Page 79: Ip Passthrough

    WL-G510 Series Router User Manual ---End 3.5 IP Passthrough 1) The router online 2) Configure IP passthrough destination MAC address (PC Ethernet MAC)
  • Page 80 WL-G510 Series Router User Manual 3) Set the PC to DHCP 4) Check the Ethernet status and ping test...

  • Page 81: Captive Portal

    WL-G510 Series Router User Manual 5) Set the PC Ethernet as DHCP to release the IP and access to router GUI again ---End 3.6 Captive Portal Please click “Advanced Network> Captive Portal” to check or modify the relevant parameter.
  • Page 82 WL-G510 Series Router User Manual Upload Portal file and Splash.html by local Upload portal images and splash.html in router for the Slider (0001_portal.png, 0002_portal.png, and 0003_portal.png) to the Router under the “ Administration / Storage Settings” menu. Furthermore, also might upload splash with images together.
  • Page 83 WL-G510 Series Router User Manual Finally, we can see the results by connect to router WIFI...

  • Page 84: Gps Settings

    WL-G510 Series Router User Manual Modify portal file storage path Modify portal file storage for In-storage as below. ---End 3.7 GPS Settings Please click “Advanced Network> GPS” to view or modify the relevant parameter.
  • Page 85 WL-G510 Series Router User Manual Table 4-6 “GPS” Instruction parameter Instruction GPS Mode Enable/Disable GPS Format NMEA and M2M_FMT(WLINK) Server IP/Port GPS server IP and port Heart-Beat If choose M2M_FMT format, heart-beat ID will be packed into GPS data. Interval GPS data transmit as the interval time.
  • Page 86 WL-G510 Series Router User Manual M2M_FMT Format as below. 1. GPS data structure. Router ID, gps_date, gps_time, gps_use, gps_latitude, gps_NS, gps_longitude, gps_EW, gps_speed, gps_degrees, gps_FS, gps_HDOP, gps_MSL 2. Example 0001_R081850ac,150904,043215.0,06,2234.248130,N,11356.626179,E,0.0,91.5,1,1.2,9 3. GPS data description Field Name Format Example Description Router ID...

  • Page 87: Firewall

    WL-G510 Series Router User Manual 3.8 Firewall 1) IP/MAC/Port Filtering This part used to intercept packages from router’s WAN/Celluar interface to Internet. Test case: 1.1 Only allow three devices (MAC/LAN/WLAN) can access to Internet via WAN: 110.110.10.10 1.2 Only allow three devices (MAC/LAN/WLAN) can access to the router page (192.168.1.1)

  • Page 88: Vpn Tunnel

    WL-G510 Series Router User Manual 4) Access Filtering This part used to filter packages from Internet to router’s WAN/Celluar interface. Test case: 4.1) Intercept all TCP packets accessing the router's WAN/Celluar(110.110.10.10). 4.2) Only two devices (MAC/LAN/WLAN) are allowed to be accessed from Internet packets.
  • Page 89 WL-G510 Series Router User Manual Navigate to Basic Network > LAN Navigate to VPN Tunnel > GRE 2) WL-G510(B) Config Navigate to Basic Network > LAN...
  • Page 90 WL-G510 Series Router User Manual Navigate to VPN Tunnel > GRE 3.8.2 OpenVPN...
  • Page 91 WL-G510 Series Router User Manual OpenVPN between WL-G510 client and Server Please click “VPN Tunnel> OpenVPN Client” to check or modify the relevant parameter. Parameter Instruction Start with WAN Enable the Openvpn feature for 4G/3G/WAN port. Tap and Tun type are optional. Tap is for bridge mode Interface Type and Tunnel is for routing mode.
  • Page 92 WL-G510 Series Router User Manual HMAC authorization As the configuration requested. Create NAT on tunnel Configure NAT in Openvpn tunnel. Parameter Instruction Poll Interval Openvpn client check router’s status as interval time. Redirect Internet Traffic Configure Openvpn as default routing.
  • Page 93 WL-G510 Series Router User Manual Parameter Instruction Certificate Authority Keep certificate same as the server Client Certificate Keep client certificate same as the server Client Key Keep client key same as the server Parameter Instruction Status Check OpenVPN status and data statistics.
  • Page 94 WL-G510 Series Router User Manual The fllowing steps are for server running on Windows 7/8/10 Access to (http://openvpn.net/release/) and download the file “openvpn-2.3.0-install.exe” (or higher) After installing OpenVPN, please find the OpenVPN folder to generate the certificate of server and client. (Access to http://openvpn.net...
  • Page 95 WL-G510 Series Router User Manual Configure “vas.bat.sample” to complete the initialization step and keys Configure the client keys to WLINK OpenVPN client GUI when you create the server and client certificate in the path OpenVPN/easy-rsa/keys Client certificate (Generated on the server)
  • Page 96 WL-G510 Series Router User Manual OpenVPN>easy-rsa>keys Ping test to your server when the tunnel is established ---End 3.8.3 L2TP/PPTP Please click “VPN Tunnel>PPTP/L2TP Client” to view or modify the relevant parameter.
  • Page 97 WL-G510 Series Router User Manual Configured as PPTP Note: The Custom Options are based on your server ---End 3.8.4 IPSec IPSec between WLINK Router and Cisco Router 1) Cisco Config (main mode) crypto isakmp policy 10 encr 3des...
  • Page 98 WL-G510 Series Router User Manual hash md5 authentication pre-share group 2 crypto isakmp key test1234 address 0.0.0.0 0.0.0.0 crypto ipsec transform-set Tran-set esp-3des esp-sha-hmac crypto ipsec nat-transparency spi-matching 2) WLINK Config Navigate to VPN Tunnel > IPSec > Group Setup Navigate to VPN Tunnel >...
  • Page 99 WL-G510 Series Router User Manual 3.10 TR-069 ACS and WL-G510 communicate through the RPC methods of TR069 protocol. The following features are currently supported in the standard firmware for the WLINK...
  • Page 100 WL-G510 Series Router User Manual family routers (Note: We also support customizing the TR069 and TR098 data-model into the firmware to support more features) SetParameterValues  GetParameterValues  Reboot   Download Upload   FactoryReset...
  • Page 101 WL-G510 Series Router User Manual 1) SetParameterValues 2) GetParameterValues...
  • Page 102 WL-G510 Series Router User Manual 3) Download, the router downloads the configuration parameters...
  • Page 103 WL-G510 Series Router User Manual 4) Upload, after uploading the router firmware, the router will automatically upgrade and restart ---End 3.11 VRRP Configuring VRRP in two WLINK routers...
  • Page 104 WL-G510 Series Router User Manual PC Ethernet Master router config...
  • Page 105 WL-G510 Series Router User Manual Backup router config 1) Normally, the master router running 2) When master router down, backup router up 3) When master router is restored...
  • Page 106 WL-G510 Series Router User Manual...

Table of Contents