Entering Command Lines And Executing Programs - Texas Instruments TI-84 Plus Manual Book

4. Press y L and then select
5. Select
2:Mem Mgmt/Del
6. Select
7:Prgm...
7. Press Í to archive the program. An asterisk will appear to the left of the program
to indicate it is an archived program.
To unarchive a program in this screen, put the cursor next to the archived program
and press Í. The asterisk will disappear.
Archive programs cannot be edited or executed. In order to edit or execute an
Note:
archived program, you must first unarchive it.

Entering Command Lines and Executing Programs

Entering Command Lines and Executing Programs Entering Command Lines and Executing Programs Entering Command Lines and Executing Programs
Entering a Program Command Line Entering a Program Command Line
Entering a Program Command Line Entering a Program Command Line
You can enter on a command line any instruction or expression that you could execute
from the home screen. In the program editor, each new command line begins with a colon.
To enter more than one instruction or expression on a single command line, separate each
with a colon.
A command line can be longer than the screen is wide; long command lines wrap
Note:
to the next screen line.
Chapter 16: Programming
2:Mem Mgmt/Del
to display the
to display the
PRGM
from the
menu.
MEM MGMT/DEL
menu.
menu.
MEMORY
430