Midea MRF29D9BST User Manual page 16

Celsius-Fahrenheit conversion
Press and hold the
•
conversion function.
Forcing AP mode
Press and hold
•
AP mode, "AP" will appear in the temperature display area and the
the module enters AP mode successfully (the
mode and the temperature display area returns to normal temperature display.
Sabbath mode
Press the
•
If the refrigerator is connected to the Internet, you can enter or exit the Sabbath mode through
•
the corresponding function buttons in the Smart Home refrigerator control interface, and the
APP can select the automatic exit time.
When in Sabbath mode, the display will turn off after 6 seconds, the lamp will not light, and
•
there will be no buzzer sound. The dispenser will only display the selected function in low
brightness.
When the APP terminal enters the Sabbath function, the APP terminal may send a command to
•
turn off the ice maker function at the same time.
Activating/deactivating the door prompt tone
Press and
•
sound.
EN
ATTENTION
If the door is not closed after power-on, the APP or machine will give an alarm, call three times after exceeding 2
minutes, and then add one alarm every 1 minute. Close the door to stop the alarm.
ATTENTION
The super freeze function is designed to maintain the nutritional value of the food in the freezer. It can freeze the
food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn
on the super freeze function and put the food in. At this time, the freezing speed of the freezer compartment is
increased, which can quickly freeze the food, effectively lock the nutrition of the food, and facilitate storage.
button for 3 seconds to achieve Celsius and Fahrenheit
for 3 seconds to force the refrigerator's the wireless network module into
and simultaneously for 3 seconds to enter or exit the Sabbath mode.
simultaneously for 3 seconds to activate/deactivate the door opening prompt
icon lights steadily), it automatically exits AP
16
icon will flash. After