Midea MRF29D9BST User Manual page 12

Leveling Feet
To avoid vibration, the appliance must be leveled.
If required, adjust the leveling feet (located on both sides of the bottom front) to compensate for the
uneven floor.
The front should be slightly higher than the rear to aid in door closing.
Leveling feet can be turned easily by tipping the cabinet slightly.
Turn the leveling feet counterclockwise
Aligning the Doors
Tools to be provided by the user
1. Raise the lower door up to the level of the higher door.
2. Using a pair of pliers, insert the supplied fastener ring into the gap between the hinge grommet
and the lower hinge. The number of fasten rings you need to insert depends on the gap.
EN
Moving the Appliance
1. Remove all items from the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the
appliance.
3. Tape parts such as shelves and the door to prevent from falling off while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting the appliance over a
long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug into a socket outlet to switch on the
appliance.
to raise the unit, or clockwise
Pliers
Lower hinge
12
to lower it.
Hinge
grommet
Pliers
Fastener ring