Midea MRF29D9BST User Manual page 15

Use and Functions
Display
When the refrigerator is electrified, the display screen will totally display for 3 seconds,
•
meanwhile the start-up bell rings, then the display screen enters the normal display of
operation. (When powered on for the first time, the default set temperature of the refrigerator
compartment and freezer compartment is 39℉/ 0℉).
It will display the set temperature of both refrigerator and freezer compartments when there is
•
no fault.
Under normal circumstances, the display light will go out after 30 seconds in the locked state,
•
button operation on display panel would wake up the display screen; if the door opening action
wakes up the display screen, the display light would go out immediately when the door is
closed; when the "fault code visible" type of fault occurs, the display screen lights up, and will
go out after 30 seconds.
Lock/Unlock
In the unlocked state, press and hold the
•
the buzzer sound rings.
In the locked state, press and hold the
•
the buzzer sound rings.
It will enter the locked state if there is no opening door action or button operation within 30
•
seconds.
The alarm sound can be stopped by pressing any one button in locked state, but all other
•
button operations need to be performed in unlocked state.
Refrigerator temperature setting
Press the
•
Each time you press the
setting range of the refrigerator compartment is 1°C/34°F to 7°C/44°F.
The temperature setting will take effect after the display panel is locked.
•
Freezer temperature setting
Press the
•
you press the or
range of the freezer compartment is -22°C/-7°F to -14°C/7°F.
The temperature setting will take effect after the display panel is locked.
•
Mode setting
After setting the minimum fridge temperature at 1 °C/34°F, continue to press the
•
once to enable the super cool function, and the
super cool mode, press the
compartment then press
After setting the minimum freezer temperature at -22°C /-7°F, continue to press the
•
once to enable the super freeze function, and the
the super freeze mode, press the
compartment and then press
Press the
•
the button to switch the freezer ice maker on/off. When the ice maker function is
switched on, the indicator icon of the ice maker will be on, otherwise it will be off.
Filter element time reset
Press and hold for 3 seconds to perform the "RESET FILTER" function. At this time, the filter's
•
working data is cleared.
button
button
button to change the set temperature of refrigerator compartment.
or button, the set temperature increases or decreases by 1°F. The
button to change the set temperature of freezer compartment. Each time
button, the set temperature increases or decreases by 1°F. The setting
button to change the set temperature of refrigerator
button to set the temperature.
button to set the temperature.
button to switch the fridge ice maker on/off. Correspondingly, press
for 3 seconds to enter the locked state and
for 3 seconds to enter the unlocked state and
icon is on. If you want to manually exit the
icon is on. If you want to manually exit
button to change the set temperature of freezer
15
EN
button
button