Midea MRF29D9BST User Manual page 19

prompt icon flashes and the other function icons are off; the digital area is off, and the blue bar
under the button is always on.
If there is an error, the error code is displayed in the digital area within 30 minutes of power-up.
•
Dispensing Water and Ice
Ice and/or water can be dispensed automatically or manually.
1. Dispensing cold water
Touch the button until the indicator icon
•
Manual water dispensing: Press the cup against the dispenser paddle to dispense cold water.
•
Release the paddle to stop dispensing.
Automatic water dispensing: Place the cup in the center of the drip tray, press the
•
button once, the dispenser chute will automatically descend to a preset height and start
dispensing water. Upon completion, the chute will ascend back to its initial position.
Note: While water or ice is being dispensed, you can press the
immediately and return the dispenser chute to its initial position.
2. Dispensing crushed ice
Touch the button until the indicator icon
•
Manual ice dispensing: Hold the cup close to the dispenser spout to avoid ice spills. Press
•
the cup against the dispenser paddle to dispense crushed ice. Release the paddle to stop
dispensing.
Automatic ice dispensing: Place the cup in the center of the drip tray, press the
•
once, the dispenser chute will automatically descend to the rim of the cup (if the cup is short,
the chute will descend to the lowest level) and start dispensing crushed ice. Upon completion,
the chute will ascend back to its initial position.
Dispense water/ice
manually
19
Dispense water/ice
automatically
lights up.
button to stop the process
lights up.
EN
button