Midea MRF29D9BST User Manual page 8

Tools Needed
EN
Installing the Water Line
WARNING: Connect to potable water supply only.
Water line installation kits are available as an additional accessory from your dealer or at a local
hardware store.
Installing the water line
1. First, shut off the main water supply line and
turn off the ice maker.
2. Locate the nearest cold water supply valve.
3. After connecting the water supply to the
water valve, turn your main water supply back
on and flush several gallons of water to clear
the water supply line.
The minimum inlet water pressure: 276 KPa
(40 psi).
The maximum inlet water pressure: 689 KPa
(100 psi).
Adjustable Wrench
Phillips Screwdriver
Pliers
Flat-head Screwdriver
1/10" Allen (Hex) Wrench
Tape Measure
Level
Cold water line
Pipe clamp
Shut-off valve
Water line installation kit
08