Drive Bay Installation/Removal; Accessing The Drive Bays - Supermicro SUPERSERVER 6025B-3 User Manual

S S
UPER ERVER 6025B-3/6025B-3R User's Manual
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

SAS Drives: You do not need to access the inside of the chassis or remove power
to replace or swap SAS drives. Proceed to the next step for instructions.
Note: You must use standard SAS drives in the SuperServer 6025B-3/6025B-3R.
DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive bays,
proceed to the "5.25" Drive Bay Installation" section later in this chapter for instruc-
tions.
Figure 6-2. Removing a System Fan
6-4