Danfoss ED3 User Manual page 13

User Guide
EC-BDC1200
Safety information
©
Danfoss | March 2025
The requirements of this user guide and other related instructions and standards must be
followed.
Do not touch the electric device during operation. The surface of the electric device can be
hot.
This electric device is intended for professional use as a part of complete equipment or
system. The electric device uses high voltages and currents, and it has large amounts of
stored electrical energy. Close attention is required to system design and electrical
installation to avoid hazards in either normal operation or in the event of equipment
malfunction.
The electric device can only be used in the applications it is intended for. The rated nominal
values and operational conditions are shown in the rating plate.
BC425854117339en-000105 | 13