Danfoss ED3 User Manual page 5

User Guide
EC-BDC1200
General information
Intended use of the user guide
Product naming convention
Conformity according to standards
©
Danfoss | March 2025
This user guide contains the installation, operation and maintenance instructions for the EC-BDC1200
electrical converter.
This user guide contains instructions necessary to safely and properly handle, install and maintain the
electric device. They should be brought to the attention of anyone who installs or maintains the electric
device or associated equipment.
All of the safety warnings and instructions in this user guide must be followed to prevent injury to
personnel or damage to property. Only qualified and authorized personnel, familiar with health and
safety requirements and national legislation, shall be permitted to handle, install and maintain the
device.
This user guide must be kept for future reference during installation, operation and maintenance.
This user guide uses illustrations as examples only. Illustrations in this user guide may not necessarily
reflect all system features.
In this user guide, the EC-BDC1200 electric converter is referred to as the electric device.
The following naming convention is used to refer to electric device type code and options:
•
EC-BDC1200
Part of the name
EC
BDC1200
The electric device has been designed in accordance with the essential parts of the following directives
and to meet the requirements of the standards:
Applicable directives and standards
Directives / Standards
Low Voltage Directive 2014/35/EU
The electromagnetic compatibility
(EMC) Directive 2014/30/EU
EN 61851-21-1:2017
UN Regulation No. 10 Revision 6
EC-BDC1200 in vehicle usage
In vehicle usage, the electric device requires an external filter when operated as a charger to comply with
UN Regulation No. 10. For more information, see the product data sheet.
Explanation
Electric Converter
Product name part 1
Explanation
The low voltage directive (LVD) (2014/35/EU) ensures that electrical
equipment within certain voltage limits provides a high level of protection
for European citizens, and benefits fully from the single market. It has been
applicable since 20 April 2016.
EMC directive ensures that electrical and electronic equipment does not
generate, or is affected by, electromagnetic disturbance.
Electric vehicle conductive charging system - Part 21-1 Electric vehicle
onboard charger EMC requirements for conductive connection to AC/DC
supply.
Uniform provisions concerning the approval of vehicles with regard to
electromagnetic compatibility.
BC425854117339en-000105 | 5