Danfoss ED3 User Manual page 10

User Guide
EC-BDC1200
Safety information
Safety features
Electromagnetic compatibility (EMC)
©
10 | Danfoss | March 2025
Use protective footwear when you lift or move the electric device! Foot injuries could be
caused if lifting system or lifting brackets fail.
Advanced protection features have been implemented. However, the device is not compliant with
functional safety and cyber security standards.
Protection type
SW overcurrent trip
SW overvoltage trip
Short circuit protection
High-voltage interlock loop
Converter thermal protection
Converter temperature trip
eFuse
When interfacing other equipment, connect only equipment that are specified as part of the system
and that are compatible.
Magnetic and electromagnetic fields generated near the current-carrying conductors and
permanent magnets in electric machines represent a health danger to persons with heart
pacemakers, metal implants and hearing aids.
Persons with a heart pacemaker, metal implants or hearing aids must consult a doctor before they
enter the following areas:
•
areas in which electric equipment and parts are operated
•
areas in which electric equipment with permanent magnets are stored, mounted,
operated or repaired
If necessary, perform a special electromagnetic compatibility (EMC) test on the installation.
EMC stands for Electromagnetic compatibility. It is the ability of electric equipment to operate without
problems within an electromagnetic environment. Likewise, the equipment must not disturb or interfere
with any other product or system within its locality. This is a legal requirement for all equipment taken
into service within the European Economic Area (EEA).
Our products are designed with high standards of EMC in mind. Connect the power lines and groundings
along the instructions in this user guide to achieve the required level of EMI protection.
It is the responsibility of the installer to make sure that the equipment or system into which the product is
incorporated complies with the EMC legislation of the country of use. Within the European Union,
equipment into which this product is incorporated must comply with the EMC Directive 2014/30/EU.
Built-in
Yes
Yes
Yes
Yes with monitoring
Yes
Yes
Yes
Information
_
_
-
See user guide for more information
Sophisticated thermal model that can
automatically lower the current if
needed
-
For AC-In, AC-Out and DC-Out
BC425854117339en-000105