User Guide
EC-BDC1200
Operation
Condition monitoring during operation
©
Danfoss | March 2025
•
Voltage difference is less than 12 V
The pre-charge time-out is 15 seconds, before the electric device trips.
Risk of permanent damage to the electric device. Use the electric device only if the technical
guidelines and ambient conditions given in this user guide and in the data sheet are met.
Risk of permanent damage to the electric device. If you notice deviations from the normal
operation (for example: high temperatures or noise), stop the electric device. Find the reason
for the deviation and refer to Chapter
Monitor the electric device regularly during operation to make sure of reliable operation, to foresee
possible upcoming failures and to help to reach the designed lifetime of the product.
over the switches S3 and S4
DC
Troubleshooting
on page 46 for more information.
BC425854117339en-000105 | 41
Need help?
Do you have a question about the ED3 and is the answer not in the manual?