Injectors Table - DeLonghi DEFSGG 24 SS Installation Instructions Manual

Fig. 2.7
Fig. 2.8
Fig. 2.9
14

INJECTORS TABLE

J
BURNERS
Auxiliary (AUX)
Semirapid (SR)
Triple ring (TC)
Oven burner
Broil burner
OPERATIONS TO BE PERFORMED WHEN SUBSTITUTING
THE INJECTORS
Remove the gratings, the burner covers and the knobs;
J
Using a wrench substitute the nozzle injectors "J" (figs. 2.7 - 2.8) with those most
suitable for the kind of gas for which it is to be used.
The burner are conceived in such a way so as not to require the regulation of the
primary air.
SETTING THE BURNER MINIMUM
When switching from one type of gas to another, the minimum flow rate must also be
F
correct: the flame should not go out even when passing suddenly from maximum to
minimum flame.
To regulate the flame follow the instructions below:
– Light the burner
– Set the gas valve to
– Remove the knob
– With a thin screwdriver pass by the hole of microswitch and turn the screw F until
adjustment is correct (fig. 2.9).
For LP/PROPANE gas, tighten the adjustment screws completely.
NOMINAL REDUCED LP/PROPANE
POWER POWER
Ø injector
BTU/hr BTU/hr
[1/100 mm]
3500 1000 55
6000 1500 72
12000 5000 102
13000 1500 109
8500 - 88
position
NATURAL GAS
11" W.C.P. 4" W.C.P.
Ø injector
By-pass
[1/100 mm] [1/100 mm]
27 90
32 118
65 170
34 180
- 146
By-pass
[1/100 mm]
adjustable
adjustable
adjustable
adjustable
-