PoolPak PCP Series Installation Manual
Hide thumbs
Also See for PCP Series:
- Operation and maintenance manual (46 pages) ,
- Installation manual (38 pages) ,
- Start-up procedures (20 pages)
Related Manuals for PoolPak PCP Series
Summary of Contents for PoolPak PCP Series
- Page 1 DEHUMIDIFIERS PCP Series PPK Series PPH Series FIELD INSTALLATION MANUAL P o o l P a k . c om...
-
Page 2: Table Of Contents
Pool High Limit Controller ............................6 Piping Connection ............................6 Electrical connection ..........................6 WATER-COOLED VALVE .............................. 7 Piping Connection ............................7 Electrical connections ..........................8 Pool Water Temperature Sensor..........................10 Electrical connection ..........................11 PoolPak Dehumidifier Field Installation Manual March, 2025... -
Page 3: General Information
Note Indicates a situation that hazardous situation which could result in equipment damage or improper/ineffective operation if handled improperly. March, 2025 PoolPak Dehumidifier Field Installation Manual... -
Page 4: Reference And Additional Information
Only qualified and properly trained individuals should perform Contact Us PoolPak 1-833-DAS-POOL (327-7665) 5685, rue Cypihot Schedule / Modify a Start-up: Saint-Laurent, QC Startups@DehumidifiedAirServices.com H4S1R3, Canada Inquire about Warranty: PoolPak.com Warranty@DehumidifiedAirServices.com Order Parts: Parts@DehumidifiedAirServices.com All Other Product Support: Support@DehumidifiedAirServices.com PoolPak Dehumidifier Field Installation Manual March, 2025... - Page 5 PoolPak Dehumidifier Field Installation Manual March, 2025...
-
Page 6: Pool High Limit Controller
Electrical connection Connect the control wire (female part) of the high limit controller with the (male part) connector already wired on the unit as indicated with the red arrows on the picture “3”. PoolPak Dehumidifier Field Installation Manual March, 2025... -
Page 7: Water-Cooled Valve
Follow picture below for proper connection. Valve must be installed whenever the unit is utilizing a third-party condenser loop of any kind The valves are typically stamped/designated with ports “A”, “B”, and “AB”. PoolPak Dehumidifier Field Installation Manual March, 2025... -
Page 8: Electrical Connections
Electrical connections Follow the proper electrical connection located on the field wiring diagram. Validate if the board is version 8 or version 9 Version 9 Version 8 Version 9 Board PoolPak Dehumidifier Field Installation Manual March, 2025... - Page 9 Version 8 Board PoolPak Dehumidifier Field Installation Manual March, 2025...
-
Page 10: Pool Water Temperature Sensor
When used, the dehumidifier will enable the auxiliary loop pump supplying pool water flow to the dehumidifier only when the unit is operating in pool water heating mode. PoolPak Dehumidifier Field Installation Manual March, 2025... -
Page 11: Electrical Connection
Electrical connection Follow the proper electrical connection located on the field wiring diagram Validate if the board is version 8 or version 9 Version 9 Version 8 Version 9 Board PoolPak Dehumidifier Field Installation Manual March, 2025... - Page 12 Version 8 Board PoolPak Dehumidifier Field Installation Manual March, 2025...
Need help?
Do you have a question about the PCP Series and is the answer not in the manual?
Questions and answers