PureLink OLC III Quick Start Manual page 7

Connection
Connect transmitter to the DVI port on your computer.
•
Connect receiver to the DVI port on your digital display product.
•
Connect Multi-mode LC type 1 channel standard fiber-optic cable
•
between transmitter and receiver.
Connect power adapter to the transmitter and receiver which has been
•
provided.
The blue LED will appear on the transmitter and receiver after all the
•
product connections are completed.
- Red LED On: Power supply.
- Blue LED On: Signal Transfer.
- Red Led On and Blue LED Blinking: Only power supply, signal not
transfer.
(Connections are not completed or there is problem with compatibility)
Troubleshooting
Screen is not
displayed.
Noise is shown
on the screen.
If the malfunction is not fixed by the above measures, please contact the A/S center.
☞
- Check if the source device power is on.
- Check if connections to the source and display
device are correct.
- Turn the source device power off and on again.
- Check if connection to DC adapter is correct.
- Check the DVI connection.
- Check the display resolution.