Cast Tec POLARIS INTEGRA INSET ARCH ECO Installation And Operating Instructions Manual page 4

Polaris Integra Arch Eco Manual Ref No: I17. V2.
INSTALLATION ESSENTIALS
The installation of a fireplace or stove must be in accordance with local codes and
regulations in each country and other national and European standards that apply.
Your Polaris Arch Inset Eco stove must be installed by a Competent Person registered with
a Government Approved Competent Person's Scheme.
In the UK, HETAS is a qualified body that can assist with general advice, regulation,
installation, type of fuel usage and can provide a list of registered Competent Persons:
Website is www.hetas.co.uk.
PRE-INSTALLATION CHECKS
Installation of a fireplace must be according to local codes and regulations in each country.
All local regulations, including those which refer to national and European standards, must
be observed when installing the product.
Both an installation manual with technical data and a manual on general use and
maintenance are enclosed with the product. The installation can only be used after it has
been inspected by a qualified inspector. A name plate of heat-resistant material is affixed to
the product. This contains information about identification and documentation for the
product.
4 Cast Tec Ltd