Related Manuals for Advantech IDK-2110WP-K5XGA1
Summary of Contents for Advantech IDK-2110WP-K5XGA1
- Page 1 User Manual IDK-2110WP-K5XGA1 10.1'' WXGA High Brightness Industrial Display Kit with Projected Capacitive Touch Solution...
-
Page 2: A Message To The Customer
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable. -
Page 3: Product Warranty (2 Years)
Product Warranty (2 Years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation. - Page 4 IDK-2110WP-K5XGA1 User Manual...
-
Page 5: Table Of Contents
Table 3.4: USB Interface Connector and Pin Assignment..16 Appendix A LCD Optical Characteristics .....17 LCD Module Optical Characteristics ............18 Table A.1: Optical Characteristics..........18 Appendix B Safety Precautions ......21 Assembly and Handling Precautions ............22 IDK-2110WP-K5XGA1 User Manual... - Page 6 Storage Precautions ................22 Other Precautions ................... 23 Safety Precautions.................. 23 IDK-2110WP-K5XGA1 User Manual...
-
Page 7: Chapter 1 Overview
Chapter Overview... -
Page 8: General Description
General Description The Advantech IDK-2110WP series features a 10.1" industrial-grade LCD display equipped with a built-in LED driver and projected capacitive touch technology. It offers versatile LCD options, including anti-feflection surface treatment and optical bonding. With a typical 9.9 W, the IDK-2110WP series is energy-efficient and ideal for embedded applications, providing customers with maximum flexibility for mechanical design. -
Page 9: Mechanical Characteristics
Unit: mm 249.96±0.3 (T/S OUTLINE) 7.90 16.20 217.56±0.5 (T/S TRANDSPARENT AREA) 5.30±0.3 AA Center Pantone Black C 4.48 3.77 9.00±0.5 49.15 164.46 70.50 Rear View Unit: mm 8.22 231.00±0.5 (LCM OUTLINE) Note: Tolerances unless marked are ±0.5mm. IDK-2110WP-K5XGA1 User Manual... - Page 10 IDK-2110WP-K5XGA1 User Manual...
-
Page 11: Chapter 2 Lcd Display
Chapter LCD Display... -
Page 12: Backlight Unit
For reference LED Backlight Current Ta=25°C LED Lifetime Note* Note*: Brightness to be decreased to 50% of the initial value. Ta=25°C IBL=360mA 90mA When LCM operates at over 40°C ambient temperature, the ILED should be as fol- lows: IDK-2110WP-K5XGA1 User Manual... -
Page 13: Lvds Receiver
Vcm=+1.2V Mode Voltage Note: Input signals shall be low or Hi-Z state when VDD is off. All electrical characteristics for the LVDS signal are defined and shall be mea- sured at the interface connector of the LCD. IDK-2110WP-K5XGA1 User Manual... -
Page 14: Interface Timing
Note: HT * VT * Frame Frequency ≤ (76.6) MHz. All reliabilities are specified for timing specification based on refresh rate of 60Hz. 2.3.2 Interface Timings Timing Diagram of Interface Signal (DE mode) Figure 2.1 Timing Characteristics IDK-2110WP-K5XGA1 User Manual... -
Page 15: Power Consumption
ADJ logic level High Note 1: Measure Condition Figure 2.2 VDD Rising Time Note 2: Frame Rate=60Hz, VDD=3.3V, DC Current. Note 3: Operating temperature = 25°C, humidity 55%RH. Note 4: The reference measurement circuit of rush current. IDK-2110WP-K5XGA1 User Manual... -
Page 16: Power On/Off Sequence
Backlight Enable ON Backlight Enable Off to System PWM Off System PM Off to B/l Power Disable Backlight Power Off Time T9 Backlight off to Signal Disable Signal Disable to Power Down VIN Fall Time Power Off IDK-2110WP-K5XGA1 User Manual... -
Page 17: Input Terminal Pin Assignment
Not Connected Not Connected LED_VCC Power Supply for LED Driver :12V LED_VCC Power Supply for LED Driver :12V LED_VCC Power Supply for LED Driver :12V Not Connected BIST BIST pin. (Keep NC or “HIGH” if not use.) IDK-2110WP-K5XGA1 User Manual... - Page 18 Table 2.7: Signal Pin Assignment Not Connected Not Connected Not Connected Not Connected Not Connected Note: All input signals shall be in a low or Hi-resistance state when VDD is off. IDK-2110WP-K5XGA1 User Manual...
-
Page 19: Chapter 3 Touchscreen & Touch Controller
Chapter Touchscreen & Touch Controller... -
Page 20: Touchscreen
COF (Chip on FPC tail) FPC Tail Bending Radius R2.5 mm Peeling upward 90deg with 500gw without impact on elec- Holding Force for Tail tric performance. Connector Pins & Pitch 5 pins, pitch is 1.25 mm Top Surface Finish Type Clear IDK-2110WP-K5XGA1 User Manual... -
Page 21: Touch Controller
Touch Controller Advantech’s IDK-2110WP series projective capacitive touchscreen adopts a COF (Chip on FPC) design, so an extra touch control board is not required. This communi- cates with a PC system directly through USB connectors. The superior design is sen- sitive, accurate, and user friendly. - Page 22 1258WOR0-05K). The pins are numbered as shown in the table below. Table 3.4: USB Interface Connector and Pin Assignment Pin No. Symbol Remarks Ground Pull low voltage to disable the touch function. Releas- ing this pin will re-enable the touch function. IDK-2110WP-K5XGA1 User Manual...
-
Page 23: Appendix Alcd Optical Characteristics
Appendix LCD Optical Characteristics... -
Page 24: Lcd Module Optical Characteristics
Avoid abrupt temperature change during measuring. In order to stabilize the lumi- nance, the measurement should be executed after lighting the backlight for 15 min- utes in a windless room. Note 2: The LED input parameter setting: PWM: duty 100% IDK-2110WP-K5XGA1 User Manual... - Page 25 Every measuring point is placed at the center of each measuring area. Bmin Luminance Uniformity (Yu) ------------- - Bmax L ----- Active area length W ----- Active area width Bmax: The measured maximum luminance of all measurement positions. Bmin: The measured minimum luminance of all measurement positions. IDK-2110WP-K5XGA1 User Manual...
- Page 26 IDK-2110WP-K5XGA1 User Manual...
-
Page 27: Appendix B Safety Precautions
Appendix Safety Precautions... -
Page 28: Assembly And Handling Precautions
Display quality may be reduced if the ambient temperature is lower than 10ºC. For example, the response time may become slow, and the starting voltage of the lamp will be higher than at room temperature. IDK-2110WP-K5XGA1 User Manual... -
Page 29: Other Precautions
In case of contact with hands, skin or clothes, wash the affected area thoroughly with soap. At the end of the module’s lifecycle, it poses no harm if it has been operated and stored under normal conditions. IDK-2110WP-K5XGA1 User Manual... - Page 30 IDK-2110WP-K5XGA1 User Manual...
- Page 31 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2025...
Need help?
Do you have a question about the IDK-2110WP-K5XGA1 and is the answer not in the manual?
Questions and answers