Axis Q8752-E Mk II Repainting Instructions
Bispectral
Hide thumbs
Also See for Q8752-E Mk II:
- User manual (98 pages) ,
- Installation manual (22 pages) ,
- Installation manual (128 pages)
Related Manuals for Axis Q8752-E Mk II
Summary of Contents for Axis Q8752-E Mk II
- Page 1 AXISQ8752-EMkIIBi spectralNetworkCamera AXIS Q8752-E Mk II Bispectral Network Camera Repainting instructions...
-
Page 2: Impact On Warranty
AXIS Q8752-E Mk II Bispectral Network Camera Impact on warranty This product is approved for repaint by Axis, provided that you follow the instructions in this document and at axis.com/warranty-implication-when-repainting. Risks with repainting There are several risks when disassembling or assembling an Axis product. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. - Page 3 • other metal • plastic The materials used in this product are Aluminium EN AC-44300 for the camera and ASA LURAN S 797 SEUV Axis White for the weathershield. Disassembly Important If you remove any other parts than those specified in this document, it means that the ingress protection (IP) rating of your product can’t be guaranteed.
- Page 4 AXIS Q8752-E Mk II Bispectral Network Camera 1 Weathershield screw (2x) 2 Weathershield Remove the weathershield screws. Remove the weathershield.
- Page 5 AXIS Q8752-E Mk II Bispectral Network Camera Masking Mask the following parts: • All visible screws, screw holes and ventilation holes • Shaft openings in the pan unit • Opening between the base unit and the pan unit • Labels and front window (including the wiper)
- Page 6 AXIS Q8752-E Mk II Bispectral Network Camera Repainting Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer, and let the paint dry. If you wish to get a better coverage and clearer color, apply a second layer of spray paint.
- Page 7 AXIS Q8752-E Mk II Bispectral Network Camera Reassembly 1 Weathershield screw (2x) 2 Weathershield Return the weathershield to it’s position. Put back and tighten the weathershield screws (torque 0.8 Nm). NOTICE For instructions on how to repaint illuminator brackets, see the product’s repainting instructions available at...
- Page 8 T10222705 2025-03 (M1.4) © 2025 Axis Communications AB...
Need help?
Do you have a question about the Q8752-E Mk II and is the answer not in the manual?
Questions and answers