1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. Q8414-LVS
  6. Installation manual

Axis Q8414–LVS Installation Manual

Network camera
Hide thumbs Also See for Q8414–LVS:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AXIS Q8414–LVS Network Camera

Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Axis Q8414–LVS

Summary of Contents for Axis Q8414–LVS

  • Page 1: Installation Guide

    AXIS Q8414–LVS Network Camera Installation Guide...
  • Page 2 Low Voltage (LVD) Directive 2006/95/EC. See Safety Every care has been taken in the preparation of this on page 3 . document. Please inform your local Axis office of any • Restrictions of Hazardous Substances (RoHS) Directive inaccuracies or omissions. Axis Communications AB cannot 2011/65/EU.
  • Page 3 FAQ database. は、家庭環境で使用することを目 的としています Search by product, category, or phrase が、この装置がラジオやテレビジョン受信機に近 • report problems to Axis support staff by logging in to 接して使用されると、 受信障害を引き起こすこと your private support area があります。 取扱説明書に従って正しい取り扱い • chat with Axis support staff (selected countries only) をして下さい。...

  • Page 5: Hazard Levels

    AXIS Q8414–LVS Network Camera Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 6: Safety Instructions

    Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report.

  • Page 7: Maintenance

    • To clean the Axis product, use soapy water or other multi-purpose cleaning agents (acidic, alkaline, neutral)* and follow the instructions provided by the manufacturer. • If required, the Axis product can be cleaned with a water hose. Move the spray in a side-to-side motion.

  • Page 9: Installation Steps

    Installation Guide This Installation Guide provides instructions for installing AXIS Q8414–LVS Network Camera on your network. For other aspects of using the product, see the User Manual available at www.axis.com Installation Steps 1. Make sure the package contents, tools and other materials necessary for the installation are in order.

  • Page 10: Hardware Overview

    AXIS Q8414–LVS Network Camera Hardware Overview Cable gasket (network cable) Cable gasket (I/O or audio cable) PoE Class selector * Network connector Audio out connector LED indicators Audio in connector I/O connector Control button 10 IR window 11 Microphone 12 Not used 13 SD card slot * Used for switching between PoE Class 2 (limited IR) and PoE Class 3 (full IR).

  • Page 11: Led Indicators

    AXIS Q8414–LVS Network Camera LED Indicators Color Indication Net- Green Steady for connection to a 100 Mbit/s network. Flashes for network work activity. Amber Steady for connection to a 10 Mbit/s network. Flashes for network activity. Unlit No network connection.
  • Page 12 The control button is used for: • Resetting the product to factory default settings. See page 26. • Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS Service. For more information about these services, see the User Manual.

  • Page 13: Specifications

    AXIS Q8414–LVS Network Camera Specifications Operating Conditions The Axis product is intended for indoor use. Product Classification Temperature Humidity AXIS Q8414–LVS NEMA 250 Type 4X, 0 °C to 50 °C 10-100% RH IEC/EN 60529 IP66, (32 °F to 122 °F)
  • Page 14 AXIS Q8414–LVS Network Camera DC output Can be used to power auxiliary equipment. 3.3 V DC Note: This pin can only be used as power out. Max load = 50 mA Digital Input Connect to pin 1 to activate, or leave floating...

  • Page 15: Install The Hardware

    If possible, keep the protective plastic on the front of the camera assembly until the installation is complete. The Axis product can be installed with the cables routed through the wall or ceiling. Read all the instructions before installing the product. Some installation steps would benefit from being completed together because they require removal of the camera assembly.
  • Page 16 AXIS Q8414–LVS Network Camera 70 mm (2.8 in) 100 mm (4 in) Install the Camera Unit 1. Remove the gaskets from the top- and side holes in the back chassis. 2. Position the back chassis in the corner between the ceiling and the walls. Use a pencil to make marks for the screws through the top- and side holes.
  • Page 17 7. Pull the tab on the cable gasket to open it. 8. Attach the AXIS Connector Guard A on top of the RJ45 network connector. Drag the network cable gasket along the cable and plug the network cable gasket into its hole.
  • Page 18 13. If applicable: Insert an SD card (not included) into the SD card slot on the camera assembly. 14. If applicable: See Install AXIS T8642 Mounting Kit A (sold separately) on page 22. 15. If applicable: See Install AXIS Door Switch A for intrusion detection (sold separately) on page 23 16.
  • Page 19 AXIS Q8414–LVS Network Camera 19. Guide the network cable through the cable tunnel to the back of the camera assembly and plug the network cable into the network connector. 20. If applicable: Guide the I/O cable through the cable tunnel to the back of the camera assembly and plug the I/O cable into the I/O connector.

  • Page 20: Set Up The Field Of View

    AXIS Q8414–LVS Network Camera 22. Fold the top of the camera assembly upwards until the camera assembly is pressed against the entire rim in the back chassis opening. Important Adjust the cable slack so that the cables are not squeezed between the sides of the camera assembly and the back chassis.
  • Page 21 AXIS Q8414–LVS Network Camera Maximum Tilt Positions for the Lens Your tilt position for optimal field of view is found in between the maximum tilt positions. Tilt 0 . 7 m ( 2 f t 4 i n ) Tilt down 45°...

  • Page 22: Install Axis T8642 Mounting Kit A (Sold Separately)

    3. Guide the other end of the network cable through the cable tunnel to the back of the camera assembly and plug the network cable into the network connector. 4. Guide the cable ties through the cable tunnels and attach the AXIS T8642 device to the camera assembly.
  • Page 23 AXIS Q8414–LVS Network Camera Install AXIS Door Switch A for intrusion detection (sold separately) 1. On the back of the camera assembly: place the switch in the empty compartment next to the cable tunnel.

  • Page 24: Install Axis Q8414-Lvs Smoked Dome (Sold Separately)

    9. Tighten the black screws (T20, torque 2.5 Nm) to attach the camera holder to the camera assembly. Install AXIS Q8414-LVS IR Window B (sold separately) This accessory kit is suitable for installations that do not require audio. The IR light windows are not equipped with microphone holes.

  • Page 25: Access The Product

    AXIS Q8414–LVS Network Camera 5. Replace the IR light window in the front opening with an IR light window from the kit. 6. Place the camera holder in its original position on the back of the camera assembly. Important Ensure that the IR light window is positioned in its compartment.

  • Page 26: Reset To Factory Default Settings

    Further Information The User Manual is available at www.axis.com Visit www.axis.com/techsup to check if there is updated firmware available for your network product. To see the currently installed firmware version, go to Setup > About. Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides.
  • Page 28 Installation Guide Ver. M1.12 AXIS Q8414–LVS Network Camera Date: October 2014 © Axis Communications AB, 2014 Part No. 58121...

Table of Contents