Axis Q8741-E Repainting Instructions
Hide thumbs
Also See for Q8741-E:
- User manual (20 pages) ,
- Installation manual (185 pages) ,
- Manual (22 pages)
Related Manuals for Axis Q8741-E
Summary of Contents for Axis Q8741-E
- Page 1 AXIS Q87 Series AXIS Q8741-E Bispectral PTZ Network Camera AXIS Q8741-LE Bispectral PTZ Network Camera AXIS Q8742-E Bispectral PTZ Network Camera AXIS Q8742-LE Bispectral PTZ Network Camera Repainting Instructions...
-
Page 2: Impact On Warranty
Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment. -
Page 3: How To Repaint The Product
Clean the parts properly to remove oil, grease and dust. For more information on the materials used in the product, see its datasheet at www.axis.com Powder coated parts - Using fine sandpaper, remove the original powder coating down to the base material and clean the parts before painting, or use a primer. - Page 4 AXIS Q87 Series How to repaint the product Sunshield screw (2x) Sunshield 1. Remove the sunshield screws. 2. Remove the sunshield.
- Page 5 AXIS Q87 Series How to repaint the product Masking Mask the following parts: • All visible screws, screw holes and ventilation holes • Shaft openings in the pan unit • Opening between the base unit and the pan unit •...
- Page 6 AXIS Q87 Series How to repaint the product Repainting 1. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer, and let the paint dry. 2. If you wish to get a better coverage and clearer color, apply a second layer of spray paint.
- Page 7 How to repaint the product Reassembly Sunshield screw (2x) Sunshield 1. Install the sunshield. 2. Attach and tighten the sunshield screws (torque 0.8 Nm). NOTICE TICE TICE For instructions on how to repaint illuminator brackets, see the product’s repainting instructions available at axis.com.
- Page 8 Repainting Instructions Ver. M1.3 AXIS Q87 Series Date: May 2018 © Axis Communications AB, 2018 Part No. T10128007...
Need help?
Do you have a question about the Q8741-E and is the answer not in the manual?
Questions and answers