Removing The Back Cover - BenQ Q150 User Manual

BENQ Corporation
Main unit (Rear view)
1.Power Input terminal (DC 19V):
Connect this terminal to the power Adapter and power cord supplied with the TV.
2.Antenna terminal:
Connect this terminal to the antenna cable (not supplied)
3.Composite video Input (RCA Connector):
Connect this terminal to the Composite Video output terminal of your DVD Player or other Video
source.
4.Audio Input (L/R):
Connect this terminal to the sound output terminal of you DVD Player or other Video source.
This terminal is for composite, S-video and component signals.
5.S-Video Input:
Connect this terminal to the S-Video output terminal of your DVD Player or other Video source.
6.PC signal input (D -Sub 15 pin):
Connect this terminal to the PC's display (analog RGB) output terminal. This terminal also supports
the component video output (color different output) of a progressive, standard DVD Player or HDTV
unit.
7.PC audio:
Connect this terminal to the sound output terminal of your PC or Notebook.
8.DC output (DC 19V):
Connect this terminal to the wireless kit (optional accessory).

Removing the Back Cover

Before linking a connection cord to the rear
terminal, remove the back cover. Push up the
button to open sign "¦" and remove out the
back cover carefully.
To mount the cover, insert the hooks on the
left of the cover into the cabinet and push left
the back cover. Finally push down the button
to lock sign "¦" to make sure the back cover
lock ready.
Connections
18