Using Remote Control To Adjusting The Aspect Ratio Settings; Aspect Controls; Sound Adjustment In Osd; Please Refer To The Sound Adjustment Section In Pc Mode - BenQ Q150 User Manual

BENQ Corporation
Note
* The "Hue" setting can be adjusted for NTSC signal, Composite and S-Video signal only.

Using Remote Control to Adjusting the Aspect Ratio Settings

You can set the utilities on the menu screen or by the remote control directly

Aspect Controls

ASPECT
Mode Explanation
Fill Screen Any input signal scale to fit the 4:3 full screen.
Anamorphic This mode is suitable for HDTV signal and DVD titles marked with "Squeeze" or
"Anamorphic". When playing this kind of DVD title, remember to set the TV type setting
in DVD player to 16:9 mode (wide screen). And use "Anamorphic" mode to present the
movies in correct aspect ratio and better image quality. It will lose a little information of
both sides and a little bit of the picture will be cropped from each side.
HDTV (4:3) This mode is suitable for HDTV signals that directly translate 4:3 material to 16:9
format. This kind of HDTV signal will have black areas on both sides. Use this mode to
remove the black area and present the 4:3 materials in full screen. This mode will
cause more of the picture on each side to be cropped and will cause a little loss of the
16:9 HDTV signal.

Sound Adjustment in OSD

Please refer to the sound adjustment section in PC

Selecting the Utility

Please refer to the sound adjustment section in PC
Operation
36
1. You can directly press "ASPECT" button on Remote Control
as illustrated to select the Image Aspect Ratio you pref e r and
the screen display information appears as follows:
Mode.
Mode.