Advertisement
–
Number
–
Special character
Manage TLS certificates
The Remote System Controller web service and KVM use the HTTPS server certificate to provide TLS
connections. You can change the server certificate the Remote System Controller uses through the web
interface or API.
Trusted certificates authenticate external servers, such as the fleet manager, or servers that store data
such as virtual media images, update packages, or subscribers to hardware alerts. Trusted certificates
can be added or removed through the UI or API.
NOTE:
Not installing your own server certificate causes the Remote System Controller to use self-
signed certificates, which is not recommended.
Configure Firmware Updates settings
Follow this procedure to configure the RSC Firmware Updates settings.
1.
On the left side of the dashboard, select RSC Settings.
2.
In the Operations section, select the Firmware Updates button.
3.
On the Automatic Updates tab, you can change the automatic update mode and frequency using
these options:
●
Automatically check and install updates: When this mode is selected, the RSC automatically
downloads and installs the latest updates.
●
Notify me of updates, and I will install it manually: When this mode is selected, the RSC checks
for the latest updates automatically but does not download or install them. You must follow
step 5 to update the fireware manually.
●
Do not check for updates: When this mode is selected, the RSC does not check for the updates
automatically. You must follow step 4 or 5 to update the firmware manually.
NOTE:
(Daily, Weekly, or Monthly).
4.
On the Manual Updates tab, you can perform a firmware update manually by following this
procedure:
a.
Select the blank field to open a file explorer window.
b.
Find and select the firmware file with the extension tar.gz on the local computer.
NOTE:
that you are using, depending on whether the file name contains
correlates to the Remote System Controller and Integrated Remote System Controller,
respectively.
The file transfers, and the update starts automatically. This might take several minutes. When
the update is complete, a message is displayed, notifying you of the result of the operation.
The checks for these two modes happens according to the selected Schedule frequency
Be sure to match the firmware update file to the version of Remote System Controller
external or internal , which
Manage TLS certificates
11
Advertisement
Need help?
Do you have a question about the Remote System Controller and is the answer not in the manual?
Questions and answers