Pro-Form J4 User Manual page 5

ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials untilassembly is completed.Assembly requires the Included allen wrench _
and your own phillips screwdriver ._=====_.
Note: The underside of the treadmill walking belt is coated with high-performancelubricant. During shipping,a
small amount of lubricant may be transferredto the top of the walking belt or the shippingcarton. This is a normal
conditionand does not affect treadmill performance. If there is lubricanton top of the walking belt, simplywipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Extension Leg Screw (53)-4
Latch Screw (35)-2
1. With the help of a second person, carefully raise the
treadmillto the upright position.As a second person tips
the treadmillto one side slightlyand holds it, insertone
of the Extension Legs (34) intothe treadmillas shown.
Make sure that the Base Pad (40) is on the indicated
side of the Extension Leg. Attach the Extension Leg
with an Extension Leg Screw (53). Be sure to push on
the head of the Extension Leg Screw while tighten-
ing It.
Attach the other Extension Leg (not shown)as described
above.
With the help of a second person, carefully lower the
treadmillso that both Extension Legs (34) are resting
flat on the floor.
34
40
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
I
5