Do you have a question about the CARON TL and is the answer not in the manual?
Questions and answers
Vickie Fordiani
March 9, 2025
We just assembled our treadmill and it’s not working making a beeping noise. We did not get the red emergency key. Will it work without it?
1 comments:
Mr. Anderson
May 14, 2025
No, the Pro-Form CARON TL treadmill will not work without the red emergency key. The key must be inserted into the console for the treadmill to operate.
Page 1
TREADMILL EXERCISER Model No. 831.23073.0 Serial No. User's Manual Write the serial number in the space above for reference. Serial Number Decal • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co. Hoffman Estates, IL 60179 CAUTION Read all precautions and instructions in this manual before...
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. Sears assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
19. Always stand on the foot rails when starting 25. When folding or moving the treadmill, make or stopping the walking belt. Always hold the sure that the storage latch is holding the handrails while using the treadmill. frame securely in the storage position. Do not operate the treadmill while it is folded.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM reading this manual, please see the back cover of this ® CARBON TL treadmill. The CARBON TL treadmill manual. To help us assist you, note the product model provides an impressive selection of features designed number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you finish all assembly steps.
Page 9
2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (88) to the front of the Base (97). Next, identify the Right Upright (86). Have a second person hold the Right Upright near the Base (97).
Page 10
4. Hold the Right Upright (86) against the Base (97). Make sure not to pinch the Upright Wire (89). Insert two 3/8" x 2 3/8" Screws (3) with two 3/8" Star Washers (11) into the top of bracket on the Right Upright (86). Partially tighten the two Screws into the Base (97);...
Page 11
6. Identify the Left and Right Handrails (80, 81). Attach the Right Handrail (81) to the Right Upright (86) with two 5/16" x 2 1/4" Screws (7) and two 5/16" Star Washers (12) in the location shown; start both Screws, and then tighten them.
Page 12
8. With the help of a second person, hold the con- sole assembly (F) near the Right Upright (86). Next, insert the Upright Wire (88) through the indicated looped tie (G). Connect the Upright Wire (88) to the wire (H) from the console assembly (F).
Page 13
10. IMPORTANT: To avoid damaging the Pulse Crossbar Bottom (87), do not use power tools and do not overtighten the #10 x 3/4" Screws (6). Attach the Pulse Crossbar Bottom (87) to the Handrails (80, 81) with four #10 x 3/4" Screws (9) and four 1/4"...
Page 14
12. Orient the Storage Latch (84) as shown. Attach the Storage Latch to the Left Upright (85) with two 1/4" x 4 1/2" Screws (8) and two 1/4" Star Washers (10); start both Screws, and then tighten them. 13. Firmly tighten the four 3/8" x 2 3/8" Screws (3), the two 3/8"...
Page 15
14. IMPORTANT: You must activate your Console (105) to begin using its exclusive features. First, plug in the power cord (see page 16) and turn on the power (see page 18). Then, using your smartphone or tablet, go to iFit.com/activate and follow the instructions to activate the Console (105).
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit.
Page 17
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you IMPORTANT: To activate your console and begin exercise. using its exclusive features, see assembly step 14 on page 15.
Page 18
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 19
4. Change the incline of the treadmill as desired. The Incline tab will show a profile of the incline set- tings of the workout. A new segment will appear at To change the incline of the treadmill, press the the end of each minute. The Speed tab will show a Incline increase or decrease button or one of the profile of the speed settings of the workout.
Page 20
6. Measure your heart rate if desired. 7. When you are finished exercising, remove the key from the console. You can measure your heart rate using either the handgrip heart rate monitor or a compatible heart When you are finished using the treadmill, step rate monitor.
Page 21
Each workout is divided into segments. One speed If the speed or incline setting is too high or too low setting and one incline setting are programmed for at any time during the workout, you can manu- each segment. Note: The same speed setting and/ ally override the setting by pressing the Speed or Incline buttons;...
Page 22
HOW TO CONNECT YOUR TABLET TO THE 5. Disconnect your tablet from the console if CONSOLE desired. The console supports Bluetooth connections to tab- To disconnect your tablet from the console, first lets via the iFit—Smart Cardio Equipment app and to select the disconnect option in the iFit—Smart compatible heart rate monitors.
Page 23
THE SETTINGS MODE DEMO—The console features a display demo The console features a settings mode that keeps track mode, designed to be used if the treadmill is dis- of treadmill information and allows you to personalize played in a store. While the demo mode is turned console settings.
THE OPTIONAL CHEST HEART RATE MONITOR THE OPTIONAL TABLET HOLDER Whether your The optional tablet goal is to holder (F) will hold burn fat or to your tablet securely strengthen your in place and enable cardiovascular you to use your tablet system, the key while you exercise.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at to zero before you fold the treadmill. Then, remove the left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown, the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used.
Page 27
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the a. If the walking belt is off-center, first remove the specifications described on page 16.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 29
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
PART LIST Model No. 831.23073.0 R0819A Key No. Qty. Description Key No. Qty. Description 3/8" x 1 1/4" Screw Rubber Cushion 3/8" x 1 3/4" Screw 3/8" Pin 3/8" x 2 3/8" Screw Drive Roller/Pulley #8 x 3/4" Screw Controller Clamp #8 x 1/2"...
Page 31
Key No. Qty. Description Key No. Qty. Description Console Frame Console Cable Tie Console Ground Wire Wheel Console Clamp 9/32" Plastic Bushing Key/Clip – User’s Manual Console Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
1 YEAR FULL WARRANTY If this Sears Treadmill Exerciser fails due to a defect in material or workmanship within 1 year of the date of purchase, call 1-800-4-MY-HOME (1-800-469-4663) to arrange for free repair (or replacement if ® repair proves impossible). The frame is warranted for 10 years. This warranty does not apply when the Treadmill Exerciser is used commercially or for rental purposes.
Need help?
Do you have a question about the CARON TL and is the answer not in the manual?
Questions and answers
We just assembled our treadmill and it’s not working making a beeping noise. We did not get the red emergency key. Will it work without it?
No, the Pro-Form CARON TL treadmill will not work without the red emergency key. The key must be inserted into the console for the treadmill to operate.
This answer is automatically generated