Symbols Used; Display Of Warnings; Signal Word - BWT Pure SLIM Installation And Operating Manual

1.5

Symbols used

The following symbols in this documentation
indicate specific sources of danger or important
information:
General danger to persons, sys-
tems or the environment.
Instructions must be observed for
safe operation.
Information that should be noted.
Recycle the product after decom-
missioning.
1.6

Display of warnings

In this document, warnings precede any sequence
of actions that could cause harm to persons or
damage to property. All hazard prevention measures
must be followed.
Warnings are displayed as follows:

SIGNAL WORD!

Source of hazard (e.g. electric
shock)
Type of hazard (e.g. risk of fatal injury)!
► Ways to prevent the hazard
Signal word Colour
DANGER
WARNING
CAUTION
NOTE
Severity of the hazard
Hazard with a high
degree of risk.
Indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury.
Hazard with a moder-
ate degree of risk.
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
Hazard with a low
degree of risk.
Indicates a hazardous
situation which, if not
avoided, may result
in minor or moderate
injury.
Wa r n s o f m a t e r i a l
damage to the product
and/or the environment.
5
EN