EN
The illustration serves as an example. The tap is
not included in the delivery.
10
6
Installation
The following requirements must be met:
● All local installation regulations, general guide-
lines, hygiene measures, specifications and
instructions in the documentation provided with
the product must be followed.
● The product must not be installed with a water
supply that is not designated as drinking water.
Lines for the separate tap:
1. System water supply (inlet water)
2. Filter inflow IN
3. Tap water supply (outlet water) OUT
A pressureless tap system interrupts the water
supply before the water reaches the product. This
design prevents leakage when the system is idle or
not in use for a longer period of time and protects
the system from possible damage caused by pres-
sure fluctuations. After the tap is closed, the system
maintains the pressure for a few seconds so that a
1
drop of water is able form briefly at the water outlet.
2
3
The tap is not included in the delivery.
NOTE
► A floor drain should be provided within
two metres of the installation to effectively
drain any water caused by leaks.
A separate tap for filtered drink-
ing water must be installed in
accordance with the installation
instructions. The manufacturer's
instructions must be followed.
Need help?
Do you have a question about the Pure SLIM and is the answer not in the manual?