Subscribe to Our Youtube Channel
Related Manuals for Sentera Controls DRE
Summary of Contents for Sentera Controls DRE
- Page 1 ELECTRONIC FAN SPEED CONTROLLER, DIN RAIL MOUNTING Mounting and operating instructions...
-
Page 2: Table Of Contents
WIRING AND CONNECTIONS MOUNTING INSTRUCTIONS IN STEPS OPERATING INSTRUCTIONS DISPLAY AND LIGHT INDICATIONS MENU STRUCTURE TROUBLESHOOTING TRANSPORT AND STOCK KEEPING INFORMATION WARRANTY AND RESTRICTIONS MAINTENANCE MIW-DRE-EN-000 - 24 / 02 / 2025 2 - 90 www.sentera.eu back to the table of contents... -
Page 3: Safety And Precautions
If there are questions that are not answered, contact your technical support or consult a professional. MIW-DRE-EN-000 - 24 / 02 / 2025 3 - 90 www.sentera.eu... -
Page 4: Product Description
DIN RAIL MOUNTING PRODUCT DESCRIPTION DRE is a digital motor speed controller with a regulated and an unregulated output, a minimum and maximum output voltage setting and a kickstart / softstart selection. It features an output overwrite function in Modbus mode. -
Page 5: Operational Diagrams
Cable cross section: max. 2,5 mm MOUNTING INSTRUCTIONS IN STEPS Before you start mounting the DRE speed controller, read carefully “Safety and Precautions”. Then proceed with the following steps: Mount the controller on a standard DIN rail. Pull the locking clip before you place the unit onto the rail and then push the locking clip back to its original position to fix the enclosure to the rail (see Fig. - Page 6 Customise the settings (Umin, Umax, regulation type, start type, kickstart duration and unit status) to the desired ones. Use either the menu or Modbus. For more details, please refer to the “Operating instructions” chapter. MIW-DRE-EN-000 - 24 / 02 / 2025 6 - 90 www.sentera.eu...
-
Page 7: Operating Instructions
DIN RAIL MOUNTING OPERATING INSTRUCTIONS The DRE controller provides a normal / inverse regulation of the output signal (a percentage of the supply voltage) — see section “Operational diagrams”. When the regulation is normal, the output voltage increases proportionally with the steps. -
Page 8: Display And Light Indications
7 – 94,4 %, 0 – step 1 – 77,8 %, 6 – 91,7 %, Umax 0...9 0 – 75,0 % 5 – 88,9 %, MIW-DRE-EN-000 - 24 / 02 / 2025 8 - 90 www.sentera.eu back to the table of contents... -
Page 9: Troubleshooting
In case of heavy pollution, clean with a non-aggressive product. In these circumstances the unit should be disconnected from the supply. Pay attention that no fluids enter the unit. Only reconnect it to the supply when it is completely dry. MIW-DRE-EN-000 - 24 / 02 / 2025 9 - 90 www.sentera.eu...
Need help?
Do you have a question about the DRE and is the answer not in the manual?
Questions and answers