Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 41

Example 3–2 Booting DIGITAL UNIX from a Local Disk
(Continued)
************************************************************************
*
* Starting Desktop Login on display :0...
*
* Wait for the Desktop Login screen before logging in.
*
************************************************************************
DIGITAL UNIX Version V4.0E (sabl28.eng.pko.dec.com) console
login:
The show device command displays device information, including name and
type of connection to the system. See Section 4.3 for a description of the show
device command and the device naming convention.
The operating system is on the third disk connected to the system through the
controller in slot 3 of PCI1. The name of this device, dkc0, is used as an
argument to the boot command.
This command loads DIGITAL UNIX from the disk dkc0, using the boot file
vmunix and autobooting to multiuser mode. See Section 4.5 for a description
of the boot command.
The boot command accepts the name of a boot device, a boot file name
through the -file option, and boot flags through the -flags option. The
environment variables bootdef_dev, boot_file, and boot_osflags can also be
used to specify the default boot device or device list, the default boot file, and
flag information. When an option and the corresponding environment variable
are both in a command string, the option overrides the environment variable.
The value of the environment variable, however, is not changed. See Section
4.18 for information about environment variables.
The operating system banner displays.
Operation 3-7