Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 104

DIRECT V1.0 D 10-MAR-1994 17:45:43
ERASE V2.1 D 10-MAR-1994 17:45:43
VERIFY V1.1 D 10-MAR-1994 17:45:43
DKUTIL V1.1 D 10-MAR-1994 17:45:43
PARAMS V3.0 D 10-MAR-1994 17:45:43
Total of 9 programs.
Task? params
starting PARAMS on pua0.3.0.8.0 (RF0700)
Copyright (C) 1990, 1991, 1992
PARAMS> show allclass
Parameter Current
--------- ------------ --------------
ALLCLASS
PARAMS> exit
Exiting...
Task?
P00>>>
The set host command connects the console program to another DUP server on an
MSCP DSSI device. You can use the DUP protocol to examine and modify parameters
of a DSSI device. The syntax is:
set host -dup [-task task_name] device
-dup Connect to an MSCP DUP server. The DUP service may be used
to examine and modify parameters of a DSSI device.
-task task_name Specifies the DUP utility to invoke. If -task is not specified, a
directory of utilities displays.
device The device to attach to the console program.
4-20 AlphaServer DS20 User's Guide
Digital Equipment Corporation
Default
1 0
Type Radix
-------- -----
Byte Dec B